Sanyo PJ-NET ORGANIZER POA-PN10 User Manual download pdf (Page 55)

Network Unit

OWNER’S MANUAL

ENGLISH

Control multi- projectors at the same time

Status

If some of the registered projectors are deactivated by some means (such as discon-

necting the power source, disconnecting the LAN cable, disconnecting from the net-

work), control changes will continue to be effective for the projectors that are still

activated. At the same time, the deactivated projectors are excluded from the multi-

control, and they will be displayed with gray background color as shown below. The

status of the registered projectors are indicated in the "Status" column. See the table

below for status indications.

✐ If the multi-controlled projector is in the standby mode, any change is not effective except

timer setting.

✐ It is recommended that a specified projector should be chosen for setting when you use this

multi-control function. The control for the multi-controlled projectors will become too compli-

cated operation if this function is used for each projector.

✐ If the registered projector is not connected to the network, it will take some time to complete

the multi-control operation because of waiting for the response from each registered projec-

tor.

Status Description

(none) Connected correctly

no connected It is not connected to the network. Please check

the connection and network configuration of this

projector.

password error The login password is incorrect. The password for

the multi-controlled projectors must be the same.

Change password of this projector to the common

password.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 89 90

No comments

Sanyo PJ-NET ORGANIZER POA-PN10 User Manual Page 55