Sanyo MDF-C8V User Manual download pdf (Page 68)

TEMPERATURE RECORDER (OPTION)

6. Attach the sensor cover to the right side of the

chamber with 2 screws on the chamber wall (Fig. 4)

7. Seal the access port on the outside with putty as

shown in Fig. 5.

8. Replace the front panel and fix it with 4 screws.

9. Operate the freezer until the chamber temperature

gets to the set temperature. Check the recorded

temperature and chamber temperature displayed on

the control panel. Adjust the zero adjustment volume

on the temperature recorder so that the recorded

temperature can corresponds with the displayed

temperature if they are not compliance each other.

Refer to the instruction manual enclosed with the

recorder.

Fig. 4

Fig. 5

Putty

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 91 92

No comments

Sanyo MDF-C8V User Manual Page 68