Sanyo POA-PN03C User Manual download pdf (Page 60)

Chapter 4 Controlling the Projector

✐ The timer operates by using the clock function provided in this product. Before setting the timer,

please confirm that the current date and time are set correctly. Timer and clock functions are

functioning using a lithium battery provided in this product. When the battery runs down, the

clock and timer functions will not operate correctly. Consult your local dealer for the replacement

of battery. The replacement must be carried out by a qualified service personnel.

Notes on timer setting

✐ Up to 10 timer events can be registered. Timer events always operate according to the next valid

event depending on the projector's power status. In the example below, event 3 turns on the

projector so next event 4 (also turning on projector) will not be effective because the projector

is already turned on. Similarly, when the projector is turned off by event 5, event 6 OFF will not

be effective in turning it off again. But these secondary events (event 4 and event 6) will become

effective if a person turns off the projector (after event 3 and before event 4) or turns on the pro-

jector (after event 5 and before event 6).

Event 1 ON

Event 2

OFF

Event 3

Event 4

Event 5

OFF

Event 6

OFF

Projector Power

OFF OFF OFF

Invalid event Invalid event

Time

✐ When the timer events are set at the same time, the last event set will override the previous

events. For example, if there is an event like "ON at 8:00 everyday" and then new event is set like

"OFF at 8:00 everyday", only the last setting event is effective.

✐ When the timer event ON occurs during cooling down period, this is invalid event because the

projector cannot be turned on during this cooling down period.

Timer setting

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 123 124

No comments

Sanyo POA-PN03C User Manual Page 60