Sanyo LNS-S04 Installation Manual download pdf (Page 2)

Some parts are not used for installation or replacement. Keep these parts for later use.

Note : Figures in this manual may be differ from the actual product.

After installing or replacing the lens, be sure to check the following for safety.

1. Check the lens is securely fixed.

2. Check no part is missing, or no mounting part is loose.

BE SURE TO CHECK FOR SAFETY

-1-

LIST OF CONTENTS

Following parts are included in the packing.

• LENS 1 pc.

• LENS CAP Front and rear (Each 1 pc.)

• SCREW DRIVER 1 pc.

• INSTALLATION MANUAL 1 pc.

Lens installation and replacement should be performed by the qualified

service personnel.

It should be followed by this procedure precisely.

Before attempt to replace the lens, confirm the model number (both the

LCD projector and the lens) and use the proper lens.

The lens cover is on the lens for protection. Be sure to remove the lens

cover before installation.

When installing or removing the lens, be careful not to stain, scratch or

damage the lens.

When shipping the projector with the lens, remove the lens before shipping

the projector.

If you have any questions, contact the dealers.

Notes on Lens Installation and Replacement

●

1 2 3 4 5 6

No comments

Sanyo LNS-S04 Installation Manual Page 2