Sanyo CE52LH1R User Manual download pdf (Page 9)

n PIP/POP Setup

Use the

5 or 6

button to select PIP/POP Setup and press the

1 or 2 button to enter the sub menu.

PIP/POP Mode: Using the 1 or 2 button select the most

suitable mode

PIP1, PIP2, POP or Off. (Please refer to page 12.)

0 When Mode is set to Off, Sub Source and PIP Position will not

work.

Main Source is used to select input source (AV1, AV2, AV3, PC or

DVI ) for main picture by using the 1 or 2 button.

Sub Source is used to select input source (AV1, AV2, AV3, PC or

DVI) for sub picture by using the 1 or 2 button.

0 For a combination of main picture and sub picture: only DVI

input can assemble with other input source. For

example, if main source is selected as AV1 input, then the sub

source must be DVI input.

PIP Position: Using the 1 or 2 button it can be selected

Top Left, Top Right, Bottom Right or Bottom Left.

n Initial Settings

This function returns all setting values except for Dealer Mode and

channel messgaes by using this function.

n Text Language

Use the

5 or 6

button to select Text Language and press the

1 or 2 button to select Western, Eastern, Russian, Arabic or

Farsi.

n Tile Mode

This function allows you to split an image to suit your monitor grid

format to create a video wall.

Use the

5 or 6

button to select Tile Mode and press the 1

or 2 button to enter the sub menu as follows.

ile Mode

Active

can be set On or Off using the 1 or 2

button.

H_Sets is used to divide the horizonal picture into more than one

part, but the most is 5 parts.

V_Sets is used to divide the vertical picture into more than one part,

and the most is also 5 parts. Using the 1 or 2 button to set.

H Location is used to select one part of the horizonal picture to

display on the current LCD Monitor using the 1 or 2 button.

H Location is used to select one part of the vertical picture to

display on the current LCD Monitor using the 1 or 2 button.

Bezel H Adjustment is used to bezel horizonal adjustment to

smooth image using the

1 or 2 button. (0~10)

Bezel V Adjustment is used to bezel vertical adjustment to smooth

image using the 1 or 2 button.(0~10)

n AV2 Setting

Use the

5 or 6

button to select AV2 Setting and press the

1 or 2 button to select YPbPr or RGBHV.

Connect your PC to either PC-IN or RGBHV on the rear of the set.

Once connected select PC mode or AV2 (RGBHV, see page 5 for

AV2 input settings) via the INPUT button on your remote control.

The set will become a monitor for the PC.

n Native Resolution

Use the

5 or 6

button to select Native Resolution and press

the 1 or 2 button to select XGA or WXGA 1366 x 768.

Press the MENU button and select PC Adj. using the

5 or 6

buttons, press the 1 or 2 button to enter. Press the BACK

button to return to the previous menu. Press the MENU button to exit

menu operation.

Auto Adjust is used to automatically detect incoming signal, and

adjust itself to optimize its performance by using the 1 or 2

button. If the image is not displayed properly, a manual adjustment

is required (Refer to following adjustments).

H-Position is used to move the horizontal picture position by using

the

1 or 2 button.

V-Position is used to move the vertical picture position by using the

1 or 2 button.

Clock is used to eliminate flicker from the image by using the 1

or 2 button.

Phase is used to eliminate disorder from the image by using the

1 or 2 button.

MENU OPERA

TION

H_S

ets

V_Sets

Setup menu

PC Adj. menu

H_Sets

V_Sets

     

                                               

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Comments to this Manuals

No comments

Sanyo CE52LH1R User Manual Page 9

Comments to this Manuals

Related products and manuals for Public displays Sanyo CE52LH1R