Sanyo MBR-1404GR User Manual download pdf (Page 13)

REFRIGERATOR COMPONENTS

Control panel

1. Alarm buzzer stop key (BUZZER): Press this key to temporarily silence the buzzer in the event that

the alarm operates and buzzer sounds.

2. Temperature display (UPPER/LOWER): By pressing this key, the displayed temperature is

changed; upper monitor bottle temperature, lower monitor bottle temperature, and average temperature

of upper and lower monitor bottles are displayed in sequence.

3. Alarm test key (ALARM TEST): To check the operation of alarm buzzer, lamp, and remote alarm

terminal.

4. Calibration key (CAL): To calibrate the temperature. Normally this key is not used.

5. Digit shift key ( ): Pressing this key in the CAL mode will cause the changeable digits to move.

6. Numerical value shift key ( ): Pressing this key in the CAL mode will cause the numerical value

to change.

7. Door check lamp (DOOR): This lamp is lit when the door is ajar or open.

8. Alarm lamp (ALARM): This lamp is flashed during alarm condition.

9, 10. Temperature display monitor lamp (UPPER, LOWER): Lamp 9 is lit when upper monitor bottle

temperature is displayed. Lamp 10 is lit when lower monitor bottle temperature is displayed. Both 9

and 10 are lit when the average temperature is displayed.

11. Digital temperature display (TEMPERATURE

C): The upper or lower monitor bottle temperature

or average temperature is displayed.

1 2 3 4 5 6

8 9 10 11

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 25 26

No comments

Sanyo MBR-1404GR User Manual Page 13