Sanyo SPW-XR254EH56 User Manual download pdf (Page 6)

2-3. Placing the Unit Inside the Ceiling

(1) When placing the unit inside the ceiling, deter-

mine the pitch of the suspension bolts using the

supplied full-scale installation diagram. (Fig. 2-4)

The size of the opening for the indoor unit can be

confirmed by attaching the full-scale installation

diagram beneath the unit. (Fig. 2-4)

Tubing and wiring must be laid inside the ceiling

when suspending the unit. If the ceiling is already

constructed, lay the tubing and wiring into posi-

tion for connection to the unit before placing the

unit inside the ceiling.

(2) The length of suspension bolt must be appropri-

ate for a distance between the bottom of the bolt

and the bottom of the ceiling of 15 mm or more

as shown in Fig. 2-4.

(3) Thread the 2 hexagonal nuts (field supply) and

washers onto the 4 suspension bolts as shown in

Fig. 2-5.

Use 2 sets of nuts and washers (upper and

lower), so that the unit will not fall off the suspen-

sion lugs.

(4) Remove the protective cardboard used to protect

the fan parts during transport.

(5) Adjust the distance between the unit and surface

of the ceiling. (48 mm) (Fig. 2-4)

Fig. 2-4

Fig. 2-5

15 mm or more

48 mm

2260_X_I

Full-scale installation diagram

(printed on a cardboard packing)

Full-scale installation

diagram

2261_X_

Nuts and washers

Double nuts

(Use above and below)

Suspension bolt

Suspension lug

Upper

Lower

Notch

48 mm

1 2 3 4 5 6 7 8 9 10 11 ... 39 40

Comments to this Manuals

No comments

Sanyo SPW-XR254EH56 User Manual Page 6

Comments to this Manuals

Related products and manuals for Split-system air conditioners Sanyo SPW-XR254EH56