Sanyo PDP42H2A User Manual download pdf (Page 30)

PC ADJUSTMENT

PC MODE ADJUSTMENT

"PC mode adjustment" menu is provided to adjust "Clock", "Phase", "Position" and "Power save" to conform to your

computer. These functions can be operated as follows:

Auto setup

COMPUTER MODE

Press the MENU button and the On-Screen Menu will appear.

Press the

eedd

buttons to select "PC mode adjustment" menu

and then press the OK button. "PC mode adjustment" menu will

appear.

Press the

eedd

buttons to select an item that you want to adjust,

and then press the OK button. The selected item will appear.

"Auto setup" function is provided to automatically adjust "Clock",

"Phase" and "Position" to conform to your computer.

"Auto setup" can be started by pressing the the 8 button, and the

message "Now adjusting" will be displayed.

To return to the previous menu, press the STATUS button after the

adjustment is completed.

Adjust each value by pressing the 78 buttons.

PC MODE ADJUSTMENT MENU

Sound adjustment

Screen adjustment

Picture setup

Initial setup

PC mode adjustment

Screen saver

Information

Picture adjustment

Select

Return

Exit

STAT US

NOTE :

● While the Auto setup is working, pressing the MENU button finishes

adjustment immediately and the message "Auto setup" will disappear.

● In the following cases, the Plasma Monitor may not adjust itself with the

"Auto setup" function:

1) If the picture is not displayed fully on the screen.

2) When a contrast picture, such as an outdoor scene, is displayed on the

screen.

● Depending on the signal and computer's configuration, "Auto setup"

function cannot be performed properly. In this case, adjust "Clock",

"Phase" and "Position" manually.

PC mode adjustment

Auto setup

Clock

Phase

Position

Power save

Select

Return

Exit

STATUS

Auto setup Proceed

PC mode adjustment

Proceed

Return

Exit

STAT US

VIDEO

PC/DVI-D

COMPONENT

WIDE

ON-OFF

VOLUME

OFF TIMER

MOVE UP

PICTURE

MUTE

ATUS

MOVE DOWN

POWER

WER

SURROUND

AUT

O PC

OFF

The Auto setup function can be operated directly by pressing the

AUTO PC button on the Remote Control Unit.

Press the AUTO PC button on the Remote Control Unit to start the

Auto setup and then the message "Now adjusting" will be displayed.

To return to the previous menu, press the STATUS button after the

adjustment is completed.

AUTO PC button

Direct operation

Clock

Adjust when Vertical noise lines are observed.

(Horizontal width will be changed by the adjustment.)

Adjust with the 78 buttons.

Clock 1344

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Comments to this Manuals

No comments

Sanyo PDP42H2A User Manual Page 30

Comments to this Manuals

Related products and manuals for Televisions Sanyo PDP42H2A