Sanyo PDG-DSU30 User Manual download pdf (Page 16)

English

Installation

Powering Off the Projector

1. Press the “ON/STAND-BY” to turn off the projector lamp,

you will see a message as below on the on-screen display.

2. Press the “ON/STAND-BY” again to conrm.

3. The cooling fan continues to operate for about 120 seconds

for cooling cycle and the POWER LED will ash blue. When

the light stop ashing and turn red, the projector has entered

standby mode.

If you wish to turn the projector back on, you must wait

until the projector has completed the cooling cycle and has

entered standby mode. Once in standby mode, simply press

“ON/STAND-BY” to restart the projector.

4. Disconnect the power cable from the electrical outlet and the

projector.

5. Do not turn on the projector immediately following a power

off procedure.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 50 51

No comments

Sanyo PDG-DSU30 User Manual Page 16