Sanyo DSR-3709 User Manual Page 26
- Page / 126
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
RECORDING3
English 25
Use the following procedure to record video from
immediately before occurrence of an alarm.
1 Set pre-alarm recording.
Follow the instructions on
P.79
set “7. ALARM REC MODE
SET” from <RECORD SET> to “PRE-ALARM
RECORDING”.
2 Press the [EXIT/OSD] button.
The setting procedure is ended and the display returns to
the normal screen.
“PRE” appears in the operation display area. Pre-alarm
recording starts (without the “REC” symbol being
displayed).
Pre-alarm recording is automatically ended and alarm
recording starts.
z “PRE” from the operation display area is replaced by
“ALARM”, and “ALARM” starts to flash.
z When recording for the first time, the default settings
are used. For details regarding modification of the
picture quality or recording rate, see P.71.
z When the space remaining in the alarm recording area
drops below a preset value, the ALARM FULL indicator
on the digital video recorder’s front panel starts to flash.
If recording is continued beyond this point, the alarm
recording area will become full, recording will stop, and
the ALARM FULL indicator will stop flashing and remain
lit. In such a case, use the <RECORDING AREA SET>
menu to perform “AREA FULL RESET” for the alarm
recording area, thus allowing recording to start again
from the beginning. (JP.67)
Pre-alarm recording
<ALARM REC MODE SET>
ALARM RECORDING : ENABLED
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : ON
ALARM INTERLEAVE : ONLY
REC RATE: A 15FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ON
REC RATE: A 15FPS, DURATION: 1MIN
=> (00371 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
02
01-01-04 00:00:00 EN A PRE 0000
EXIT/OSD
If an alarm is detected
01-01-04 00:00:00 REC REPEAT EN A ALARM 0000
02
ALARM FULL indicator
e00_l8h/jointfilesconvert/1261789/bg_us_7.book Page 25 Thursday, November 25, 2004 1:44 PM
- PRECAUTION 2
- INTRODUCTION 3
- CONTENTS 4
- 4 English 5
- 1 BEFORE USE 6
- 6 English 7
- NAMES AND FUNCTIONS OF PARTS 8
- 8 English 9
- NAMES AND FUNCTIONS OF PARTS2 10
- DSR-3716 10
- 10 English 11
- INSTALLATION AND CONNECTIONS 12
- 12 English 13
- INSTALLATION AND CONNECTIONS3 14
- (Dome Cameras) 14
- Connecting an amplifier 14
- Connecting ALARM IN terminals 14
- Connecting SENSOR ALARM OUT 15
- Connecting CONTROL terminals 15
- Connecting the power cord 15
- 1 PREPARING FOR USE 16
- 1 Press the [MENU] button 17
- 10-01-2004 MON 00:00:00 18
- PREPARING FOR USE1 19
- The internal hard disk 19
- 2 VIEWING VIDEO FROM A CAMERA 20
- VIEWING VIDEO FROM A CAMERA2 21
- 16 screens) 21
- Viewing on plus screen 21
- Viewing on the monitor 2 22
- 1 Press the [MON2] button 23
- 3 RECORDING 24
- 1 Set alarm recording 25
- 3 End alarm recording 25
- 1 Set pre-alarm recording 26
- 4 PLAYBACK 27
- PLAYBACK4 28
- Changing the playback speed 28
- Enlarging the playback video 28
- 4 Press the [ZOOM] button 29
- 2 Press the [QUAD] button 30
- 1 Press the [MULTI] button 30
- SEARCHING FOR RECORDED VIDEO 31
- SEARCHING FOR RECORDED VIDEO5 32
- Alarm search 32
- Alarm thumbnail search 33
- Time/date search 33
- 10-26-04 20 : 30 34
- Archive area search 35
- Motion detection search 35
- 38 English 39
- CARDCARD 40
- OPERATION 41
- To cancel a copy operation 41
- 1 Insert a CompactFlash card 44
- Copying video to CD-R/RW 46
- 1 Press the [MENU] button 48
- SETTINGS 49
- Sub-menu configuration 50
- 50 English 51
- 2 INITIAL SET 52
- WEEK MONTH TIME 53
- ON 1ST-SUN 04 02:00 53
- OFF LST-SUN 10 02:00 53
- INITIAL SET2 54
- External clock setting 54
- Setting camera titles 56
- 1. 57
- 1. 11 57
- 1. 11-17 57
- 2. 57
- 3 RECORD SET 61
- RECORD SET3 62
- Changing recording areas 66
- Setting overwrite permission 67
- Setting recording conditions 68
- Settings 70
- Connecting 70
- Setting auto deleting 72
- Setting normal recording 72
- 6 Set “AUDIO RECORDING” 73
- 7 Set “REC RATE” 73
- 8 Set “REC PROGRAM GROUP” 73
- Setting program recording 74
- Timer settings 75
- Setting alarm recording 78
- 5 Set “PICTURE QUALITY” 79
- 7 Set “ALARM INTERLEAVE” 80
- Setting the motion sensors 82
- Canceling alarms 86
- 4 GENERAL SET 87
- GENERAL SET4 88
- Setting the buzzer 89
- Setting the security lock 90
- ADMIN -------- OFF 91
- ADMIN 1------- OFF 91
- USER A------- OFF 91
- Making network connections 94
- Setting RS-485 97
- Setting camera control 98
- 1 Press the [FUNC.] button 100
- 3 Press the [FUNC.] button 100
- SCREEN SET 101
- SCREEN SET5 102
- Setting masks 105
- Setting the color level 106
- 6 POWER LOSS/USED TIME 108
- 7 INITIALIZATION LOG 109
- 8 COPY MENU SETTINGS 110
- COPY MENU SETTINGS8 111
- Loading settings from a 111
- CompactFlash card 111
- INTERFACE SPECIFICATIONS 112
- 112 English 113
- 2 SPECIFICATIONS 114
- 114 English 115
- SPECIFICATIONS2 116
- 116 English 117
- 118 English 119
- Terminal board specifications 120
- MENU SETTING SEQUENCE 122
- 122 English 123
- English 123 124
- 124 English 125
Related products and manuals for Video recorders Sanyo DSR-3709
Video recorders Sanyo SRT-8040 User Manual
(56 pages)
(56 pages)
Video recorders Sanyo TLS-224P User Manual
(31 pages)
(31 pages)
Video recorders Sanyo VHR-H690 User Manual
(44 pages)
(44 pages)
Video recorders Sanyo TLS-9960 User Manual
(48 pages)
(48 pages)
Video recorders Sanyo SRT-4040DC User Manual
(54 pages)
(54 pages)
Video recorders Sanyo TLS-9024P User Manual
(39 pages)
(39 pages)
Video recorders Sanyo VHR-H530 User Manual
(40 pages)
(40 pages)
© 2020, manymanuals.com. All rights reserved. | 0.995 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals