Sanyo TLS-9024P User Manual Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 39
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
NORMAL RECORDING
Normal Recording
œ Turn the power on to all devices used.
œ Load a cassette tape with erasure-prevention tab.
œ Set the ON SCREEN switch to the “ON” position.
1 Press the REC/PLAY SPEED l (or j) button to set
the recording speed mode.
ø
The recording speed mode is displayed
on-screen and on the digital display.
2 Press the REC button.
ø
The record indicator
m
light.
ø
Recording starts.
ø
When the end of the tape is reached, “OFF”
will be displayed.
NOTES:
œ If in the (SET UP 2) menu, in the BUZZER
section TAPE END is set to “Y”, the buzzer will
be heard as long as “OFF” is displayed on the
digital display.
œ To cancel the “OFF” display, press the STOP,
EJECT or PLAY button or turn the SHUTTLE
ring.
œ If recording stops due to a problem with the tape
or other reason, the unit will try once to resume
recording. If the tape still does not advance, the
VCR will go into stop mode.
3 To stop recording, press the STOP button.
NOTES:
œ A tape recording made on this VCR may not play
back with the same degree of clarity on a time lapse
from another manufacturer.
œ If you press on the REC button and the loaded
cassette has no erasure-prevention tab, the VCR will
eject the cassette.
[Recording Speed Mode]
Recording
speed mode
(hour mode)
Maximum
recording
duration
(hours)
Recording
interval
(second)
Audio
recording
Tape motion
3 31/50
Possible Continuous12 15 5/50
24 27 9/50
Record Pause
Recording can be interrupted temporarily.
1 Press the STILL/PAUSE button during recording.
ø
The Pause/Still indicator “
N
blinks.
NOTES:
œ The image appears on-screen but it is not
recorded.
œ If a recording pause continues for 5 minutes or
more, the VCR will go into stop mode to avoid
damaging the tape.
2 To resume recording, press the REC button, or
press the STILL/PAUSE button again.
Before starting
RR4Q/EX2 (TLS-9024P GB) Fri. Sept., 29/2000
14 English
Page view 14
1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 38 39

Comments to this Manuals

No comments