Sanyo DSR-M810 User Manual

e00_l8hae_us_7.book Page 0 Thursday, April 8, 2004 11:14 AM

English 93 INSTALLATION AND CONNECTIONSThis section describes how to connect the digital video recorder to the CCTV camera and other devices. Be sure

3 INSTALLATION AND CONNECTIONS10 EnglishINTRODUCTIONz Connect the cable of the wired remote control (VA-RMN01) (sold separately) to the remote control

English 111 SCREEN DISPLAY AND POSITIONAt power ON, the operation display area appears at the top left of the monitor screen.The operation display are

12 EnglishOPERATION2 SETTING THE LANGUAGE/CLOCKThis section describes how to set the language displayed on the monitor and how to set the digital vide

2 SETTING THE LANGUAGE/CLOCKEnglish 13(Initial setting: 01-01-2004 THU 00:00:00)Be sure to set the correct date and time. The digital video recorder s

14 EnglishOPERATION3 NORMAL RECORDING/TIMER RECORDINGFollow the steps below to record the monitored image.1 Set the TV SYSTEM selector switch on the r

English 154 ALARM RECORDINGUse the following procedure to have video recorded when an alarm signal is received during recording.z Check that the devic

16 EnglishOPERATION5NORMAL RECORDING/TIMER RECORDING PLAYBACKFollow the steps below to play back recorded images.1 Press the [ ] button.The PLAY/STOP

5 NORMAL RECORDING/TIMER RECORDING PLAYBACKEnglish 171 During playback, press the [STILL] button.The image becomes a still image (freezes). appears in

18 EnglishOPERATION6 SEARCHING FOR RECORDED IMAGESRecorded images can be searched. There are two search methods available.Image to search Search in &l

English 1PRECAUTIONCAUTION: Changes or modifications not expressly approved by the manufacturer may void the user’s authority to operate this equipmen

6 SEARCHING FOR RECORDED IMAGESEnglish 193 Press the [ ] or [ ] button to select the image to play back.The selected alarm image is displayed in the p

6 SEARCHING FOR RECORDED IMAGES20 EnglishOPERATION4 Press the [ ] button, and set the date/time to search.Example: To search for the image from Octobe

English 217COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTINGUse the following procedure to copy image recordings to a CompactFlash card, a CD-R/RW.

7 COPYING TO CF CARDS OR CD-R/RW DISCS AND FORMATTING22 EnglishOPERATION3 Press the [ ] and [ ] buttons to specify “START TIME” and “END TIME”, and th

English 238PREVENTING ACCIDENTAL OPERATION (KEY LOCK FUNCTION)Use the following procedure to set the key lock function so that operation as a result o

24 EnglishSETTINGSMENU CONFIGURATION AND OPERATIONSThis section describes the menu configuration, and which menu item to select for each operation.1 P

MENU CONFIGURATION AND OPERATIONSEnglish 25The screens below are the sub-menu screens displayed by selecting items from the MAIN MENU.Pressing the [ME

26 EnglishSETTINGS1 LANGUAGE/CLOCK SETYou can perform the following functions:Change the language used to display on-screen information.*Set the date

1 LANGUAGE/CLOCK SETEnglish 27You can set the date/time at which the time is switched from standard time to daylight savings time, and the date/time a

1 LANGUAGE/CLOCK SET28 EnglishSETTINGS4 Press the [ ] or [ ] button to select the desired time, then press the [ ] button.z Only an hour value can be

2 EnglishINTRODUCTIONMain featuresThis digital video recorder can be used to store images recorded by a monitoring camera onto its built-in hard disk.

English 292 REC MODE SET[Settings] ( indicates initial setting.)z When item (4) “OVER WRITE” is set to “OFF” and the hard disk becomes full, the digi

2 REC MODE SET30 EnglishSETTINGS1 Press the [MENU] button.The MENU indicator lights, and the <MAIN MENU> screen appears. 2 Select “2. REC MODE S

English 313 TIMER REC SETYou can set recording start/stop times using the “TIMER REC SET”.You can set times at which to start and stop cursor on each

3 TIMER REC SET32 EnglishSETTINGS5 Press the [ ] button to move the cursor to the next item.Each time you press the [ ] button, the cursor moves to th

3 TIMER REC SETEnglish 333 Press the [ ] or [ ] button to change the “STOP” time from “--:--” to “**:**”, then press the [ ] button.The “DLY” item on

34 EnglishSETTINGS4 DISPLAY/BUZZER SETYou can set the display item on the operation display area. This sub-menu also lets you set a warning buzzer to

4 DISPLAY/BUZZER SETEnglish 351 Press the [MENU] button.The MENU indicator lights, and the <MAIN MENU> screen appears. 2 Select “4. DISPLAY/BUZZ

36 EnglishSETTINGS5 SECURITY LOCK SETYou can set passwords that restrict the users. When the security lock is set, a buzzer sounds when a user presses

5 SECURITY LOCK SETEnglish 373 Press the [ ] button.The first password entry bar “-” flashes.4 Press the [ ] and [ ] buttons to select the character t

5 SECURITY LOCK SET38 EnglishSETTINGS1 Press the [ ] and [ ] buttons to move the cursor to “REC CONTROL”.2 Press the [ ] button.3 Press the [ ] and [

English 3CONTENTS1 BEFORE USE ...5Notes on handling internal hard disk drive components ...

English 396 RS-485/NETWORK SETThis section describes how to make the RS-485 terminal connections/settings needed to connect to an external device, and

6 RS-485/NETWORK SET40 EnglishSETTINGS3 Press the [ ] and [ ] buttons to select “ADVANCED SETTING” and press the [ ] button. The <NETWORK SET-ADVAN

6 RS-485/NETWORK SETEnglish 41[Settings] ( indicates default setting.)3 Press the [ ] and [ ] buttons to select the desired item, then press the [ ]

42 EnglishSETTINGS7 POWER FAILURE/USED TIMEYou can check the date/time of power failures and the amount of hard disk operation time.1 Press the [MENU]

English 438 MENU UPLOAD/DOWNLOADYou can save menu settings onto a CompactFlash card. This sub-menu also lets you read menu settings saved on CompactFl

8 MENU UPLOAD/DOWNLOAD44 EnglishSETTINGS1 Press the [ ] button.The <WARNING> screen appears.“NO” flashes. 2 Press the [ ] and [ ] buttons to se

8 MENU UPLOAD/DOWNLOADEnglish 453 Press the [ ] and [ ] buttons to select “LOAD MENUS FROM CF” and press the [ ] button. The <WARNING> screen ap

46 EnglishSETTINGS9 HDD SETThis section describes how to initialize the hard disk or add a hard disk.1 Press the [MENU] button.The MENU indicator lig

9 HDD SETEnglish 47To add a hard disk, contact a Sanyo service center. When adding a hard disk, use an add-on type hard disk unit (sold separately).[S

48 EnglishOTHER1 INTERFACE SPECIFICATIONSData formatCommunication protocolA proprietary Sanyo protocol (SSP: Security Serial Protocol) is used. Use of

CONTENTS4 EnglishINTRODUCTION OPERATION SETTINGS OTHERMENU CONFIGURATION AND OPERATIONS ...24Displaying the menu sc

1 INTERFACE SPECIFICATIONSEnglish 49 The table below shows the commands supported by the digital video recorder.DVR/VCR command tableLeft digitRight d

50 EnglishOTHER2 SPECIFICATIONSNote that product appearance and specifications are subject to change without prior notice.Television system NTSC/PAL c

2 SPECIFICATIONSEnglish 51Unit: mmDimensionsFront Side210 38096e00_l8hae_us_7.book Page 51 Thursday, April 8, 2004 11:14 AM

52 EnglishINDEXAadd a hard disk ... 47ADDRESS ...

INDEXEnglish 53sub-menus ... 25TTIME DATE SEARCH ...

sp00_l8hae_us_7.book Page 55 Thursday, April 8, 2004 11:43 AM

English 51 BEFORE USENotes on handling internal hard disk drive componentsThis unit has a built-in hard disk drive (HDD).Be sure to observe the follow

1 BEFORE USE6 EnglishINTRODUCTIONFor important recordingsz Always make a test recording beforehand to check that the digital video recorder’s playback

English 72 NAMES AND FUNCTIONS OF PARTSFront panel1. POWER indicatorLights when the power is ON.Flashes when there is a problem with the hard disk or

2 NAMES AND FUNCTIONS OF PARTS8 EnglishINTRODUCTIONRear panel1. FAN2. AUDIO IN terminal3. AUDIO OUT terminal4. LAN terminal (JP.39)5. MIC IN terminal6