Sanyo DSR-M810 User Manual download pdf (Page 11)

3 INSTALLATION AND CONNECTIONS

10 English

INTRODUCTION

z Connect the cable of the wired remote control (VA-

RMN01) (sold separately) to the remote control input

terminals (among the control terminals).

Cut the plug off the cord, and connect the red wire to

“REMOTE” and the bare wire to “C”.

(1) Push in the lock pin with a flat-blade screwdriver.

(2) Insert the cable.

(3) Pull out the lock pin with a flat-blade screwdriver. The

cable is now fixed in place.

The VA-SW814/VA-SW81LITE application software (sold

separately) lets you control the digital video recorder, and

monitor live images, recorded images and audio through a

network.

1 When you have finished making all the

other connections, insert the power

plug into the wall outlet.

There is no power switch. All the indicators on the front

panel flash for approximately 30 seconds, then the POWER

indicator lights. The monitor screen displays the camera

image.

z When turning the power ON for the first time

“PLEASE SET THE CLOCK” is displayed on the monitor

screen. Follow the steps on P.12 to set the clock.

z If the clock is

already set

The operation display

area is displayed.

z If the POWER indicator flashes

The digital video recorder has a self-check function that

detects problems. If there is a problem at power ON or

during operation, the type of problem is indicated by how

rapidly the POWER indicator flashes. Contact a Sanyo

Authorized Service Center if the POWER indicator flashes.

4 flashes per second:

The hard disk is checked automatically at power ON. If

a hard disk problem is found, the POWER indicator

flashes, and the hard disk must be replaced or initialized.

If you need to save images stored on the disk, contact a

Sanyo Authorized Service Center.

1 flash per second:

Fan problem

z If you disconnect the power cable

Don’t move the digital video recorder for 30 seconds

after power OFF.

The disk in the hard disk drive briefly keeps spinning

after power OFF due to inertia, during which time the

head is unstable. At this time, the disk is sensitive to

shocks or vibrations, so avoid even light shocks.

Connecting cables to the control and

alarm terminals

Connecting to a network

RS485

REMOTE

ABC C

Bare wire

Red wire

White

wire

VA-RMN01

Cable

Flat-blade screwdriver

HUB

HUB HUB HUB HUB

DVR DVR DVR DVR

Connecting the power cord

ALL

RESET

LAN

MIC IN

OUT

TV SYSTEM

NTSC

PAL

Power cable

HI A

05-20-04 AL 00015

08:30:45 ----------

Operation display area

e00_l8hae_us_7.book Page 10 Thursday, April 8, 2004 11:14 AM

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 54 55

Comments to this Manuals

No comments

Sanyo DSR-M810 User Manual Page 11

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR-M810