Sanyo ECD-T1545 User Manual download pdf (Page 25)

TROUBLE SHOOTING

Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with

the unit. Before having the unit serviced, refer to the troubleshooting chart below.

Symptom Cause Solution

The volume control is turned down.

Turn up the volume control.

The compact disc

does not play when

inserted into the

unit.

The power connections are not wired

correctly.

Check the +12V and ground

connections.

The vehicle ignition is switched off.

Switch the ignition to the “ON”

or “ACC” position.

No power.

The fuse is blown.

Replace the fuse with another 15

fuse.

The unit does not

work properly

(Eject, Load, Play)

The microcomputer has been affected

by electrical noise.

Press RESET button.

The road surface is rough.

Wait for the road surface to

improve before playing a disc.

The unit is not mounted securely.

Install the unit securely. Be sure to

use the rear strap if the vehicle

does not provide support for the

rear of the unit. (See page 26)

The sound from the

CD player skips.

The disc is defective.

Try another disc.

If it plays properly, the first disc

may be defective.

The disc is dirty.

Clean the disc as explained on

page 3.

No radio reception.

The antenna cable is not connected.

Insert the antenna cable firmly into

the antenna jack on the unit.

The radio does not

stop on any

stations when

automatic tuning is

used.

The signals are weak.

Select a station using manual

tuning.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Comments to this Manuals

No comments

Sanyo ECD-T1545 User Manual Page 25

Comments to this Manuals

Related products and manuals for Car speakers Sanyo ECD-T1545