Sanyo FXCD-500 User Manual download pdf (Page 22)

TROUBLESHOOTING

Sometimes a simple operational error or a mistake in the wiring can appear to be a problem with

the unit Before having the unit serviced, refer to the troubleshooting chart below

Symptom Cause Solution

The compact disc does not The volume control is Turn up the volume control

play when inserted into the turned down

unit

The power connections are Check the +I 2V and ground

not wired correctly connections

No power The vehicle ignition is Switch the ignition to the “ON” or

switched off “ACC” position

The fuse is blown Replace the fuse with another

15A fuse

The unit does not work The microcomputer has Eject the disc, then insert it again

properly (Eject, Load, been affected by electrical

Play)

noise

The sound from the CD The road surface is rough Wait for the road surface to

player skips improve before playing a disc

The unit is not mounted Install the unit securely

securely

The disc is defective Try another disc

If it plays properly, the first disc

may be defective

The disc is dirty Clean the disc as explained on

pages 3-4

No radio reception The antenna cable is not Insert the antenna cable firmly

connected into the antenna jack on the unit

The radio does not stop on The signals are weak Select a station using manual

any stations when tuning

automatic tuning is used

-21-

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 30 31

No comments

Sanyo FXCD-500 User Manual Page 22