Sanyo DIR-2000 User Manual download pdf (Page 12)

SDB Menu Operation—Picture

Picture Category

The picture feature allows you to change and adjust the on-screen image by changing the aspect ratio, pix

shape, and scan mode. Please note that the adjustable menu options depend on the current tuner, channel

selection (DTV or NTSC), and signal reception.

Selecting the Picture Aspect Ratio (Width to Height) for DTV Channels

1. Press MENU key for on-screen display.

2. Use the / keys to select the Picture Category.

3. Use the / keys to highlight the Aspect Ratio

feature.

4. Press the key.

5. Use the / keys to select the desired option: 4:3 or

16:9. Press ENTER.

NOTE: Normal is the only option available for NTSC

channels.

Selecting the Pix (Picture) Shape for DTV

Channels

1. Use the / keys to highlight the Pix Shape feature.

2. Press the key.

3. Use the / keys to select the desired option: LetterBox, Cropped, Stretch, or Expand.

Press the ENTER key.

Figure 19—Aspect Ratio

QuickTips

For Picture Aspect Ratio:



The 4:3 ratio setting is

the NTSC standard.



The 16:9 ratio setting

is a wide-screen

picture image.



Press the remote con-

trol RESET key to

clear all customized

settings and return

to factory default

settings. (SDB starts

searching for available

channels.)

or Pix (Picture) Shape:



The PIX SHAPE key

on the remote operates

the same as the PIX

SHAPE menu

selection.



Using the remote PIX

SHAPE key allows you

to quickly access the

Pix Shape feature.



If Pix Shape did not

change the image

appearance, make sure

you are receiving a

digital signal, and the

correct feature setting

is selected.

Need help?

Visit our Web site at

www.sanyoctv.com

Figure 20—Letterbox Setting

(16:9 Reception & 4:3 Aspect Ratio)

Figure 21—Expand Setting

(4:3 Reception & 16:9 Aspect Ratio)

(16:9 Reception & 16:9 Aspect Ratio)

Selecting the Scan Mode for DTV Channels

The SDB scan feature is designed to automatically adjust your TV’s picture image depending on the signal

received and tuner selected. For conventional TV the scan mode should be set to interfaced. For advanced tele-

vision, the scan mode can be set to either interlaced or progressive. In order to received the best quality picture,

match your settings with your equipment (DTV-advanced [digital] or NTSC-conventional [analog]).

1. Use the / keys to highlight the Scan Mode feature.

2. Press the key.

3. Use the / keys to highlight the appropriate option:

Interlaced or Progressive. Press the ENTER key.

NOTE: Normal is the only option available for NTSC channels.

Figure 22—Scan Mode selection

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comments to this Manuals

No comments

Sanyo DIR-2000 User Manual Page 12

Comments to this Manuals

Related products and manuals for CRT TVs Sanyo DIR-2000