Sanyo DIR-2000 User Manual download pdf (Page 19)

QuickTips



Major channels can be

selected from the CH

Map page.



Minor channels can be

selected only when the

(–) Sub CHannel key

is pressed; then the

Major channels

appears with a list

of available minor

channels.



If the RF out jack is

used, the signal will be

monaural.



Stereo is not available

through RF out; only

through A/V

connections.

Need help?

Visit our Web site at

www.sanyoctv.com

Selecting a Major or Minor Channel using the (–) Sub CHannel Key

1. DTV Channels may be selected by entering only the major number. If a DTV minor channel is not entered

after pressing the (–) Sub CHannel key, the SDB will automatically select the lowest minor channel, -01

or -1 for the DTV major channel entered. For example, if D34-_ _ is entered, the SDB will tune to DTV

Channel 34-01.

2. If any DTV minor channel number is entered as –00 or –0, the SDB will

tune to the NTSC channel matching the major channel number. For

example, if D24-00 is entered, the SDB will tune to Cable C24 or (UHF

channel 24).

3. To select a major channel with a specific minor sub-channel: enter the

major number, press (–) SUB CH key, and then enter the minor channel

number.

4. Press ENTER to instantly select the minor channel or just wait for three

seconds and the SDB will automatically select the minor channel.

Figure 48—Channel Entry for

Major Channel

Operational Tips:

• If you are watching an NTSC channel and decide

to change to a DTV channel. Simply press the

(–) SUB CH key, the DTV channel number entry

(D__) display will appear. Enter the channel num-

ber. Then press ENTER to instantly select the

minor channel or just wait for three seconds and the

SDB will automatically select the minor channel.

• If watching a DTV channel with the banner

dis-played on the screen, and you press the (–)

SUB CH key, the SDB will automatically remove

the full banner (see Figure 49). The Brief Channel

display will appear with sub channels listed (see

Figure 50).

• If watching an NTSC channel with the banner dis-

played on the screen, and you press the (–) SUB

CH key, the SDB will automatically change the

channel number entry area (D__) in the full banner

display. A digital channel number may be entered.

Figure 49

Figure 50

Figure 51—Channel entry area (circled)

Audio options will depend on the channel tuning system selected and the current broadcaster’s signal received.

The audio mode will display on screen for each selected choice, if available.

1. Press the AUDIO key, current setting will appear on screen.

2. To change setting, press the AUDIO key repeatedly until the desired option

appears.

DTV options: Main, Sub-1, Sub-2, Sub-3, ...

NTSC options: Stereo, Mono, SAP

For DTV—Main.

For NTSC—Stereo.

3. Press ENTER to instantly select the option.

NOTES:

• If audio selection is not available, the Audio mode will change to the SDB

default modes.

• If you select SAP while watching an NTSC channel, the SDB will remain in the

SAP audio mode until another option is selected. If SAP is not available, the

audio mode defaults to Stereo.

• If you select Sub-1 while watching a DTV channel, the SDB will remain in the Sub-1 audio mode until

another option is selected. If Sub-1 is not available, the audio mode defaults to Main.

Figure 53—NTSC

Option: Stereo

Audio Reception

Figure 52—DTV

Option: Main

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Sanyo DIR-2000 User Manual Page 19

Comments to this Manuals

Related products and manuals for CRT TVs Sanyo DIR-2000