Sanyo PLC-XU75 Owner's Manual download pdf (Page 27)

Computer InputComputer Input

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal,

and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows.

Auto PC Adjustment

The Auto PC adjustment function can be operated

directly by pressing the AUTO PC button on the remote

control unit.

Direct Operation

Remote Control

AUTO PC button

Press the MENU button to display the On-Screen

Menu. Press the Point 7 8 buttons to move the

red framed pointer to PC Adjust Menu item.

Press the Point ed buttons to move the red

framed pointer to Auto PC Adj. item and then

press the SELECT button twice.

Auto PC Adj.

Menu Operation

Move the red framed pointer to

the Auto PC Adj. item and press

the SELECT button.

"Please wait..." message appears

while Auto PC adjustment is in

process.

PC Adjust Menu

PC Adjust Menu icon

To store adjustment parameters

Adjustment parameters from Auto PC Adjustment can

be memorized in this projector. Once parameters are

memorized, the setting can be done just by selecting

Mode in the PC System Menu (p.26). See "Store" on

page

29.

✔ Note:

• Fine sync, Total dots, Horizontal, and Vertical of

some computers cannot be fully adjusted with this

Auto PC Adjustment function. When the image is

not provided properly with this operation, manual

adjustments are required. (p.28, 29)

• The Auto PC Adjustment cannot be operated when

480i, 575i, 480p, 575p, 720p,1035i, or 1080i is

selected in the PC System Menu. (p.26)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 66 67

No comments

Sanyo PLC-XU75 Owner's Manual Page 27