Sanyo HMP200 User Manual download pdf (Page 13)

SpinetiX SA, Rue des Terreaux 17, CH-1003 Lausanne, Switzerland

T +41 21 341 15 50 | F +41 21 311 19 56 | info@spinetix.com | www.spinetix.com

Update failed

Updating firmware

If the check for updates procedure reported that updates are available for your HMP, an Update Now button appears in the page.

Simply click this button to start the update process.

Important Do not power down the unit during the whole update process.

The HMP will restart automatically once the update process is over. It is possible that the web page displays a time-out error during the

update. However, this has no influence on the update process itself.

At the end of this process, by refreshing your web browser the new firmware version will be reported under section Current

Versions. If you click the Check for Update button again, the page will report that no updates are available.

Automatic update

If your HMP has automatic update enabled and has direct access to the Internet, it will update its firmware in an automatic and

transparent manner as soon as a firmware is available. The check (and update, if appropriate) will take place at 3:00 AM and will not

modify the content played by the HMP nor the display and networks settings.

Automatic update is not recommended if your HMP is deployed in a production environment.

To enable automatic update:

1. Check the "Enable automatic updates" check box

2. Select the update time.

3. Press Apply to validate your changes

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

No comments

Sanyo HMP200 User Manual Page 13