Sanyo DMP-692 User Manual download pdf (Page 19)

Up to 40 stations (20 AM / 20 FM) can be stored in the tuner memory for easy recall at any time.

Use either the Automatic or Manual tuning methods described on page 16 to tune to the first

station to be stored in memory. (Example “FM 103.5 MHz”)

1.)

2.)

3.)

PRESETTING STATIONS IN THE TUNER MEMORY

When the desired station frequency appears in the display, press

and release the TIME SET / MEMORY button on the remote

control or touch TIME SET / MEMORY on the top panel. The P –

01(Preset Memory #1) indicator will begin flashing in place of the

radio frequency display.

To enter your station in Preset Memory #1, press the TIME SET

/ MEMORY button on the remote control or touch TIME SET /

MEMORY control on the top panel again. The P – 01 will stop

flashing and remain on the display for 5 seconds, and then the

display will return to the selected radio frequency. Your selected

station has now been entered in Preset Memory #1.

Tune to the next station that you want to memorize and when

that station appears in the display press the TIME SET /

MEMORY once. The P – 01 indicator begins flashing. Press the

PRESET / MENU + or - button on the remote control or touch

PRESET / ALM1 - or PRESET / ALM2 + control on the top panel

to select a different preset memory number, and then press the

TIME SET / MEMORY button once more to enter your station in

the selected preset memory number.

Repeat Step 2, choosing a different preset memory number

each time until you have entered up to 20 stations on one band.

You may then select the AM band and follow the same

procedure to preset up to 20 AM stations in the tuner memory.

Note: You must press the TIME SET / MEMORY button while the memory indicator is flashing

in order to enter the station in memory. If the memory indicator stops flashing the station will

not be entered in the memory.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

No comments

Sanyo DMP-692 User Manual Page 19