Sanyo KS1872 User Manual download pdf (Page 9)

3-4. Remove the Grille to Install the Indoor Unit

Basically, these models can be installed and wired with-

out removing the grille. If access to any internal part is

needed, follow the steps as given below.

How to remove the grille

(1) Grasp both ends of the air intake grille, and remove

it by opening towards the front and pulling towards

you. (Fig. 16a)

(2) Remove the 3 screws. (Fig. 16b)

(3) Remove the screw on the right side cover plate and

open the cover. (Fig. 17a)

(4) Take out the thermistor from the grille. (Fig. 17b)

(5) Press the 3 tabs at the top of the grille and the 3

tabs on the front face to separate the grille from the

frame. (Fig. 18a)

(6) Pull the grill toward you to remove it.

How to replace the grille

(1) When installing the grille, place the bottom of the

grille into the frame first. (Fig. 18b)

Then insert the tabs on the top of the grille and on

the front face into the frame.

(2) Make sure that the grille and frame are firmly fitted

together by engaging the tabs.

(3) Attach the thermistor on the grille. (Fig. 17a)

(4) Close the cover and replace the screw. (Fig. 17a)

(5) Affix the grille with the 3 previously removed screws.

(Fig. 16b)

(6) Install the air intake grille.

(a) Allow the edge of the air intake grille to slide into the

top of the indoor unit, and then insert it all the way

inside. (Fig. 19a)

(b) Press the bottom right and left corners and center of

the air intake grille to attach it to the indoor unit.

(Fig. 19b)

Attach so that the round pins at the top right and left cor-

ners of the air intake grille are inserted into the grooves

at the top right and left of the indoor unit.

NOTE

Air intake grille

Grille

Fig. 16a

Fig. 16b

Cover

Thermistor

Fig. 17a

Thermistor

Fig. 17b

Fig. 18a

Tab

Fig. 18b

Fig. 19b

Groove

Fig. 19a

05-326 AirCon_85264189988000 12/5/05 3:35 PM Page 9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 24 25

Comments to this Manuals

No comments

Sanyo KS1872 User Manual Page 9

Comments to this Manuals