Sanyo MPX-MD162 User Manual download pdf (Page 10)

BASIC OPERATIONS

SECURITY LOCK FUNCTION

This function lets you lock the camera live picture mode or VCR

playback mode, so that it cannot be switched to another mode.

Camera Live Picture Mode Lock

Press the LIVE button for about 3 seconds.

A buzzer will be heard, and the VCR and MENU buttons will not

operate if pressed. If buttons are pressed, a buzzer will be heard

and the operation will not be possible.

VCR Playback Mode Lock

Press the VCR button for about 3 seconds.

A buzzer will be heard, and the LIVE and MENU buttons will not

operate if pressed. If buttons are pressed, a buzzer will be heard

and the operation will not be possible.

Canceling the Security Lock

To cancel the security lock, press the same button again for

about 3 seconds. A buzzer will be heard and the mode will be

unlocked.

SETTINGS BACKUP FUNCTION

This unit bottom is equipped with a backup battery (lithium

battery) to maintain the clock settings. When the unit is used

under normal conditions, the backup battery is recharged. The

battery is fully recharged after a minimum of about 30 hours, and

will maintain the clock settings for up to 30 days.

NOTE: The settings may not be maintained properly if the

backup battery has been recharged for less than 30

hours when the power goes off.

Battery Life

If the power is turned off for about one hour or more, when the

power is restored, the (CLOCK SET) menu is displayed so the

clock settings can be checked.

If the clock settings are reset to: 01-01-2000 SAT 00:00:00, that

may indicate that the battery is dead and must be replaced.

Replacing the Battery

To replace the battery, please consult your dealer. After the

battery has been replaced, press the ALL RESET button, then

in the (CLOCK SET) menu set the date and time (see page 27).

Depending on the battery usage it may become necessary to

change it. For replacement and disposal of the old battery,

please contact your dealer.

RESET FUNCTION

The menus can be reset or cleared using one of the following

two methods.

Using the ALL RESET button

Press this button to reset the following:

•

Reset the time and date in the (CLOCK SET) menu to the

default setting.

•

The display mode on monitor 1 will return to 16 divisions split

screen (default mode).

•

The display mode on monitor 2 will return to sequential

screen (default mode).

•

The information about the alarms displayed in the (ALARM

DATA) menu will be erased.

NOTE: If the unit does not function properly, press the

ALL RESET button.

Please note that all the settings mentioned above

will be reset.

Using the MENU RESET Button

A: While a menu is displayed, press the MENU RESET button

to reset all the values of the displayed menu to the default

values.

B: If no menu is displayed, press the MENU RESET button to

reset the time to the nearest hour.

NOTE: For example, between 10:30:00 and 11:29:59 the

clock will be reset to 11:00:00.

Clock, title display operations

Even if the clock and title displays are turned off in the

(DISPLAY SET) menu, the display mode can be selected as

indicated below by pressing the EXIT/DISPLAY button.

Also, when the clock is displayed, it’s position can be

changed by pressing the j (or l) button.

LIVE

VCR MENU

VCR

LIVE MENU

PLUS QUAD MULTI LIVE VCR

MON2 ZOOM STILL

SEQUENCE

EXIT

DISPLAY

ALL

RESET

10-15-1999 15:40:00

HALL-1F

10-15-1999 15:40:00

HALL-1F

No dis

Date and time display:

Title display:

Date and time and

title display:

L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31

English 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 54 55

Comments to this Manuals

No comments

Sanyo MPX-MD162 User Manual Page 10

Comments to this Manuals

Related products and manuals for Hardware Sanyo MPX-MD162