Sanyo MPX-MD162 User Manual download pdf (Page 54)

SPECIFICATIONS

Signal format : Based on NTSC color signal standard (MPX-CD162)

Based on NTSC B/W signal standard (MPX-MD162)

Camera signal input synchronization : Asynchronous

Camera input terminals (IN) : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 16

Camera output terminals (OUT) : Throughput of each input, 1.0 Vp-p/75 Ω, BNC connector x 16

VCR input terminal (VCR IN)

•

Composite input : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

•

S-VHS input terminal (S-VIDEO VCR IN): Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,

unbalanced

VCR output terminal (VCR OUT)

•

Composite output : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

•

S-VHS output terminal (S-VIDEO VCR

OUT)

: Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,

unbalanced

Monitor 1 output terminal (MONITOR OUT 1) : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

Separate YC signals, DIN connector (S terminal) x 1 (MPX-CD162 only)

Y signal: 1.0 Vp-p/75 Ω, unbalanced, synchronous; C signal: 0.286 Vp-p/75 Ω,

unbalanced

Camera live picture or VCR playback picture signal output: full screen, sequential

display, Multi-display screen

Monitor 2 output terminal (MONITOR OUT 2) : VS/VBS, 1.0 Vp-p/75 Ω, BNC connector x 1

Camera live picture signal output: full screen (can be set in (MONITOR SET) menu

to display the same image as monitor 1)

Control terminal (CONTROL)

•

Alarm input : No voltage, make-contact switch input x 16 (Low input)

•

Sensor alarm output : Alarm output x 16 (low output, normally open (NO))

•

Remote input (R1, R2) : 2-wire type with resistance-based identification system

•

Alarm output (A) : DC 5 V, 5.7 kΩ (Low output)

•

Switching input (S) : Low input, for input signal from SW OUT of timelapse VCR/real time recorder (as

per this manufacturer specifications)

•

RS485 control terminal : RJ-11 type: 2 terminals (A/B), Push-lock type: 3 terminals (A, B, GND)

•

RS-232C terminal : 9-pin D-SUB

Full screen sequence timing : Available in full screen mode, with interval selectable from 1 – 30 sec.

Monitor on-screen display : Title (up to 10 characters), date, time selectable

Menu settings : 10 menus: Language, Clock, VCR, Alarm, Active REC, Monitor, Camera, Position,

Display, Alarm data

Alarm sensor : Internal, 16 channel (each camera input, selectable)

Back-up function : Back-up for up to 30 days of the clock settings after connected for 30 hours

continuously

Operations

•

Still : Available for camera live or VCR playback in full screen and zoomed in picture

Can be set using a menu to operate automatically when there is an alarm trigger

•

2x zoom : Available for camera live or VCR playback in full screen and frozen picture

In full screen mode can switch from frozen to zoomed in picture

Power : AC 120 V, 60 Hz

Consumption : 20 W (MPX-CD162), 18 W (MPX-MD162)

Operating environment : Temperature: 5 to 40˚C, Humidity: 10 to 80%

Dimensions : 420 (W) x 86 (H) x 325 (D) mm

Weight : Approx. 4.1 kg

Products are subject to change in design and specifications without notice and without incurring any obligation.

L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31

English 53

1 2 ... 49 50 51 52 53 54 55

Comments to this Manuals

No comments

Sanyo MPX-MD162 User Manual Page 54

Comments to this Manuals

Related products and manuals for Hardware Sanyo MPX-MD162