Sanyo MPX-MD162 User Manual Page 47
- Page / 55
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ALARMS OPERATIONS
LIVE PICTURES MODE ALARM
There are three types of live pictures alarms; the alarms set by an external alarm trigger, the alarms set by a loss of the video signal
and the alarms set by the video sensors.
EXTERNAL ALARMS
Connect external inputs such as a door bell, an interphone, etc.,
to the ALARM IN terminals (1 – 16). These external switches
will send triggers to the alarm inputs and the alarm display will
be shown in live pictures mode.
Example: If an alarm trigger is received for camera 4
(in multi-display screen)
1 The buzzer is heard and the camera 4 indicator light.
The alarm output changes from HI (5V) to LOW (0V).
2 The image from camera 4 and the camera number (04)
will be displayed on monitor 1, EA (External Alarm) will
flash at the left of the camera number.
The action taken here will depend on the settings entered in
the (ALARM SET) menu (see page 31).
NOTE:
•
When the alarm operation is over, the display will return to
the mode preceding the alarm trigger.
•
An alarm trigger can also be received at a terminal for which
a camera is not connected to. In such a case, a grey screen
will be displayed and EA (External Alarm) and the
corresponding number will be displayed.
•
An alarm trigger can also be received at a terminal for which
a camera is not connected to. In such a case, “NO VIDEO”
will be displayed, on a grey screen, on the monitor screen.
Resetting the Alarm
•
For an alarm in full screen display mode, press the
corresponding SELECT button.
•
For an alarm in multi-display screen mode, press the
corresponding SELECT button to switch to full screen display
mode, then press the same SELECT button one more time.
NOTE:
•
The alarm display mode on monitor 1 is selected according to
the settings entered in the (ALARM SET) menu.
•
During normal monitoring operations the camera select
indicator lights according to the displayed camera. If there is
an alarm trigger for another camera, the indicator will flash.
VIDEO LOSS ALARM
If there is an interruption of the video signal, the buzzer is heard,
and the image just previous to the interruption is frozen
on-screen or test chart are displayed and “VIDEO LOSS” will
flash on-screen.
The action taken will depend on the settings entered in the
(VIDEO LOSS SET) menu (see page 33).
NOTE:
•
If a video signal is not present from the beginning, then “NO
VIDEO” will be displayed on a gray screen. This will not
trigger a video loss alarm.
•
During video loss alarm a frozen image or test chart are
displayed on-screen. However, on the video tape, test chart
are recorded until the alarm is reset or the video signal is
restored.
•
Even if the video loss is set to a frozen image, test chart will
be displayed when the screen display is switched, or during
sequential display.
Resetting the Alarm
•
For an alarm in full screen display mode, press the
corresponding SELECT button, “NO VIDEO” will be displayed
on a grey screen.
•
For an alarm in multi-display screen mode, press the
corresponding SELECT button to switch to full screen display
mode. Then, press the same SELECT button one more time
and “NO VIDEO” will be displayed, on a grey screen, on the
monitor screen.
NOTE:
•
The alarm display mode on monitor 1 is selected according to
the settings entered in the (ALARM SET) menu.
•
During normal monitoring operations the camera select
indicator lights according to the displayed camera. If there is
an alarm trigger for another camera, the indicator will flash.
•
If the alarm is not reset, “VIDEO LOSS” will be displayed until
normal live picture signals are restored. If the display mode is
changed it will switch from a frozen picture to test chart.
EA 04
External alarm Camera number
VIDEO LOSS
VIDEO LOSSVIDEO LOSSVIDEO LOSS
VIDEO LOSSVIDEO LOSS
(Test chart)
L8FC5/US (MPX-CD162, MD162 GB) 2000. 8. 31
46 English
- MPX-CD162 1
- MPX-MD162 1
- PRECAUTION 2
- CONTENTS 3
- FEATURES 3
- ACCESSORIES 3
- PARTS NAMES 4
- CONNECTION 6
- BASIC OPERATIONS 10
- Press the LIVE button 11
- 10 English 11
- LIVE PICTURE MODE 12
- 2 Press the ZOOM button 13
- 1 Press the SELECT 2 button 13
- 2 Press the STILL button 13
- 1 Press the SELECT 3 button 13
- 0202 Z 02Z 02 14
- SZ 02SZ 02 14
- SEQUENCE 15
- 1 Press the VCR button 17
- 2 Press the SELECT 2 button 17
- 2 Press the SEQUENCE button 17
- MONITOR 2 OPERATIONS 18
- Press the VCR button 19
- 18 English 19
- VCR PLAYBACK MODE 20
- MENU SETTING MODE 26
- LANGUAGE SETTING Menu 1 27
- End time 28
- Start time 28
- SERIAL SET menu 31
- Unit address confirmation 31
- Setting the SENSOR SET Mode 33
- SENSOR SET menu 33
- SETTING Menu 5 34
- (Normal) 35
- (REC MODE: MODE1) 35
- (REC MODE: MODE2) 35
- MONITOR SETTINGS Menu 6 36
- CAMERA SETTING Menu 7 37
- CAMERA SET menu 38
- 38 English 39
- 40 English 41
- (Fig. 1) 43
- Changing a camera position 44
- (Example of clock display) 45
- ALARM DATA DISPLAY Menu 10 46
- ALARMS OPERATIONS 47
- SA 04 48
- Sensor alarm Camera number 48
- INTERFACE SPECIFICATIONS 49
- RS-232C exclusive use 50
- RS-485 exclusive use 50
- COMMANDS AVAILABLE FROM THE 50
- COMPUTER 50
- SPECIFICATIONS 54
- SANYO INDUSTRIAL 55
- MULTIPLEXER WARRANTY 55
Related products and manuals for Hardware Sanyo MPX-MD162
Hardware Sanyo POA-MD17SDID User Manual
(4 pages)
(4 pages)
Hardware Sanyo POA-USB02 User Manual
(26 pages)
(26 pages)
Hardware Sanyo POA-MD26HDWL User Manual
(4 pages)
(4 pages)
Hardware Sanyo SHA-KA128A User Manual
(1 pages)
(1 pages)
Hardware Sanyo POA-LN01 User Manual
(52 pages)
(52 pages)
© 2020, manymanuals.com. All rights reserved. | 0.832 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals