Sanyo POA-PN03C User Manual download pdf (Page 22)

Chapter 2 Installation

Network PIN code setting

The Network PIN code can be set to restrict access to the setting page of the projector

using the web browser.

✐ Default Network PIN code [0000] means no Network PIN code is set.

1 Displaying Network PIN code menu

Select network menu and then select "Network PIN code" sub menu. Press SELECT but-

ton twice to display the Network PIN code entry pallet.

* The number on the pallet is the current Network PIN code.

2 Entering the Network PIN code

To enter the Network PIN code, use point buttons

(▲,▼,7,8) on the projector or the remote con-

trol.

3 Fixing the Network PIN code

After entering a 4-digit number, select "SET" by

using point buttons (7,8) and then press SELECT

button.

✐ The screen 10-key pallet and the remote control 10-key buttons can be used for entering the

Network PIN code. See item "How to enter the numbers with the screen 10-key pallet or remote

control 10-key buttons" (+. 23)

✐ It is recommended to set up the Network PIN code when you connect the projector to the net-

work. This setting is carried out through the projector’s menu and also it can be set through the

network using the web browser. For further information, refer to item "Initial setting/Network PIN

code setting" (+ p.35).

✐ Valid characters for the Network PIN code are only numbers 0 to 9. The number "0000" means no

Network PIN code is set.

✐ This Network PIN code is not to restrict the use of the projector. This Network PIN code is to set

the security against the use of the projector through the network.

Network PIN Code

The red frame moves

sequentially left or right

with 7 8 button.

The number up or down

with d e button.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 123 124

No comments

Sanyo POA-PN03C User Manual Page 22