Basic Serial Command Specifications
11/24
6.5. POWER ON Command
Detail
When already Power is ON, nothing is done.
When sending this command during processing Countdown, Countdown is
terminated.
Response
Unacceptable
“?”[CR]
6.6. POWER OFF Command (Quick Power OFF)
Detail
When Power is OFF with ON/STAND-BY button of the remote control, “Power
OFF?” is displayed. However, as soon as this command is sent, Quick Power OFF
is executed.
Response
Unacceptable
“?”[CR]
6.7. POWER OFF Command
Detail
The command operates the same Power OFF function as ON/STAND-BY button
of the remote control.
Once this command is sent, “Power OFF?” is displayed. If this command is sent
again while it is displayed, Power OFF is executed.
When sending this command during Countdown, Countdown is terminated.
Response
Unacceptable
“?”[CR]
6.8. Computer 1 Command
Detail
Although Input search is set to On1/On2, the search is not executed with this
command.
Response
Unacceptable
“?”[CR]
6.9. Computer 2 Command
Detail
Note 1) Although Input search is set to On1/On2, the search is not executed with
this command.
Note 2) When Monitor out is selected in a menu “Terminal”, the command is not
executed while projector returns “OK”
Response
Unacceptable
“?”[CR]
Comments to this Manuals