Sanyo PLC-WXL46 User Manual download pdf (Page 9)

PLC

WXE46/WXL46

Basic Serial Command Specifications

9/24

6. Functional Execution Command

6.1. Format

6.1.1 PC issues a command in format as below.

“C” COMMAND [CR]

Command: two characters (See Basic Functional Execution Command Table)

A projector changes received data to decode and returns a result after being ready to

receive next command.

[ACK]［CR］：（0x06、0x0D）When received Functional Execution Commands.

6.1.2 “？”［CR］：When the received data cannot be decoded.

6.2. Command Pipelining

When some functions need the command pipelining, the performance is the same as that of the

remote control;

6.2.1. System: issues any command every 100 ms.

6.2.2. When receiving the appropriate command, the function is executed for 120 ms from the

moment.

6.2.3. When receiving the same command continuously within 120 ms, the function is executed

for another 120 ms from the moment.

6.2.4. When there is no incoming command after 120 ms, the execution of pipelining is stopped.

6.2.5. When the projector receives other incoming commands within 120ms, the execution of

pipelining is stopped.

6.3. Transfer Example

Switch the projector to video mode with Basic Command.

Command

PC → Projector “C” “0” “7” CR

Projector → PC ACK CR

Processing

（A few ms ∼ 5s）

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

No comments

Sanyo PLC-WXL46 User Manual Page 9