Sanyo VCC-5774 User Manual

INSTRUCTION MANUALVCC-5774VCC-5774MCOLOR CCD CAMERA About this manualBefore installing and using the camera, please read thismanual carefully. Be sur

PARTS NAMES7Flange-back lock screw8CS mount ring9Lens mount capThe cap is installed to protect the lens mount section.Remove the lens mount cap before

MOUNTING THE LENSPlease use a DC type auto-iris lens (sold separately).Checking the lens mountDo not use lense with a length L more than 5 mm. If not,

MOUNTING THE LENSPin layout1 Brake coil (–)2 Brake coil (+)3 Drive coil (+)4 Drive coil (–)Rewiring the lens cable in the lens iris plug1 Prepare the

CONNECTIONSBasic connection for monitoring or recording(Video signal connections) : VIDEO IN : VIDEO OUTAC 24 V connection DC 12 V connect

CONNECTIONSThe peripheral devices (VCR, monitor, lens,etc.) and cables are sold separately.1 Make the video signal connectionbetween the camera and th

FLANGE-BACK ADJUSTMENTIf the pick-up surface is not correctly positioned with relation to the lensfocal point, the picture will be out of focus (in pa

SETTINGSLine phase adjustmentWhen using a camera switcher to connect 2cameras or more to one monitor, there may bea vertical roll of the images when s

SETTINGSLens iris adjustmentIf using a DC type auto-iris lens, you will need toset the LEVEL volume when shooting in theconditions described below.Cou

SETTINGSEI (Electronic iris) function settingUnder normal conditions, set the EI switch tothe EI OFF position and use an auto-iris lens.However, if yo

TROUBLESHOOTINGBefore taking the camera for repairs, please check below to make sure that the camera is used correctly. If it stilldoes not perform co

SANYO INDUSTRIAL VIDEOCOLOR VIDEO CAMERA LIMITED WARRANTYOBLIGATIONSIn order to obtain warranty service, the product must be delivered to and picked u

SPECIFICATIONSScanning system: NTSC standard TV system(525 TV lines, 30 frames/sec.)Interlace: 2:1 interlaceImage device: 1/3 inch solid state image d

SPECIFICATIONSDimensions: mmFeatures and specifications are subject to change without prior notice or obligations.51 6368(1)L53V4/US (VCC-5774) GB 2

ACCESSORIES121C mount adaptor (5 mm) ...1 pc.The C mount adaptor must be used to beable to install a C mount lens on the camera.2

Depending on the conditions of use, installationand environment, please be sure to make theappropriate settings and adjustments. If youneed help with

FEATURES• Built-in interline transfer method 1/3" CCD,approx. 410,000 picture elements• Low smear, anti-blooming, low lag, noburning and no geome

INFORMATION TO USERSafety GuardTHIS SYMBOL INDICATES THAT THEREARE IMPORTANT OPERATING ANDMAINTENANCE INSTRUCTIONS IN THELITERATURE ACCOMPANYING THISU

This equipment has been tested and found to comply with the limits for a Class B digital device,pursuant to Part 15 of the FCC Rules.These limits are

PRECAUTIONSIn case of problemDo not use the camera if smoke or a strange odourcomes from the unit, or if it seems not to functioncorrectly. Disconnect

PRECAUTIONSProtect from high temperaturesDo not install close to stoves, or other heatgenerating devices, such as spotlights, etc., orwhere it could b

PARTS NAMES1Camera mounting screw holeCAUTION:When installing the camera, select a location that can supportthe total weight of the camera and accesso