Sanyo Welder MCO-19M(UVH) User Manual download pdf (Page 75)

SPECIFICATIONS

Name Multi-gas Incubator

Models MCO-19M MCO-19M(UV) MCO-19M(UVH)

External dimensions W620 x D710 x H900 mm (W24.4 x D28.0 x H35.4 inch)

Internal dimensions W490 x D523 x H665 mm (W19.3 x D20.6 x H26.2 inch)

Interior volume 162 L (5.72 cu.ft.)

Exterior Painted steel

Interior Stainless steel containing copper

Outer door Painted steel

Inner door Stainless steel with gasket

Gastight split door 4 doors made of tempered glass

Trays 3 trays made of stainless steel containing copper

W450 x D450 x H12 mm (W17.7 x D17.7 x H0.47 inch), Maximum load: 7 kg/tray

Access port Inner diameter: 30 mm (1.18 inch), On the back side

Insulation Rigid polyurethane foamed-in place

Heating system DHA system (heater jacket + air jacket system)

Heater 314 W

Humidifying system Natural evaporation with humidifying pan

Temperature controller PID control system

Temperature display Digital display

controller PID control system

density display Digital display

controller PID control system

density display Digital display

Air circulation Fan assisted

Air filter 0.3 µm, Efficiency: 99.97% or higher

UV lamp

----- 4W X 1 (ozone-free emission)

Water level sensor

Optical

Alarms

Automatic set temperature alarm, Automatic set CO2 density alarm

Automatic set O2 density alarm, Upper limit temperature alarm

various gas/sensor/heater alarms

Remote alarm contacts Allowable contact capacity: 30 VDC, 2 A

inlet connection 4 to 6 mm (0.157 to 0.236 inch) diameter tube can be connected

inlet pressure 0.03 MPaG (0.3 kgf/cm

G, 4.3 psiG)

inlet connection 4 to 6 mm diameter tube can be connected

inlet pressure 0.05 MPaG (0.5 kgf/cm

G, 7.1 psiG)

Weight 94 kg

1 2 ... 70 71 72 73 74 75 76 77 78

No comments

Sanyo Welder MCO-19M(UVH) User Manual Page 75