Sanyo DSR-2108 User Manual download pdf (Page 59)

Connecting to this unit

To start this software, double-click the desktop shortcut icon ( ), the main screen is displayed. When connecting a camera to

this unit following the procedure below, the camera live video is displayed.

b Connecting for the first time

Click the connect button on the operation panel.

The connection dialog [Connect] is displayed.

☞ In DSR-2108, the multi-screen switch button

displays a multi-8 screen.

Input information such as the address information

and settings required for the connection.

•Site Name:

Set up an administrative designation for this unit.

• IP Address/Port No.:

Input the IP address and PORT number set on the

NETWORK screen of this unit.

When using DDNS, input the set domain name into

"IP Address".

•Protocol:

Select the protocol (TCP/UDP).

• Password:

Input the network password set on the SYSTEM

screen of this unit.

Click [OK] on the dialog [Connect].

The camera connects to this unit and the live video of

the camera is displayed on the main screen.

b Disconnecting

Once connected, the connect button on the operation panel

changes to the disconnect button.

Clicking this button disconnects the connection with this unit

and the displayed video disappears.

☞ In DSR-2108, the multi-screen switch button

displays a multi-8 screen.

b When there are several connections

The connection information used with this unit is displayed at

once under the site name in the "---Select Site---" pull down

menu.

To change the connection destination, select Site Name in the

pull down menu and click. The present connection is

disconnected and the specified site is automatically

connected.

Memo: • To change the connection destination using the

connection button, disconnect the present

connection using the disconnect button and perform

the connection operations again.

• Editing of the registered connection information

such as additions changes or deletions may be

performed under "Site" in the set up menu.

Apart from the port that has been set (e.g., 5445), the port

number plus 1 (e.g., 5446) and the port number plus 10

(e.g., 5455) are used.

This unit cannot be connected to the network if the

[CLIENT ACCESS] on the NETWORK screen is not set to

"ON". (P42)

L8HBT_WA(DSR-2116_2108)(GB).book 52 ページ２００９年５月２７日　水曜日　午後４時５０分

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 91 92

Comments to this Manuals

No comments

Sanyo DSR-2108 User Manual Page 59

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR-2108