Sanyo PLCWM5500L Owner's Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 92
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
6
Openings in the cabinet are provided for ventilation. To
ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
CAUTION
Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
Do not put any flammable object or spray can near the
projector, hot air is exhausted from the air vents.
Keep the exhaust vent at least 3’ (1 m) away from any
objects.
Do not touch peripheral parts of the exhaust vent,
especially screws and metallic parts. These areas will
become hot while the projector is being used.
Do not put anything on the cabinet. Objects put on the
cabinet will not only get damaged but also may cause
fire hazard by heat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperature inside the projector.
Exhaust Vent
(Hot air exhaust)
Air Intake Vent
Air flow
The projector uses a lamp which generates significant
heat. The cooling fans and air vents are provided to
dissipate the heat by drawing air into the housing and the
filter is located in the intake vents to prevent dust from
getting inside of the projector.
In order to care for the projector appropriately, regular
cleaning is required. Remove any dirt or dust that has
accumulated on the projector.
If the projector reaches a time set in the timer setting, a
Filter replacement icon (Fig. 1) appears on the screen and
WARNING FILTER indicator on the top panel lights up (see
below), indicating that the filter replacement is necessary.
If the projector detects that the filter is clogged and
no scroll is left in the filter cartridge, a Filter cartridge
replacement icon (Fig. 2) appears on the screen and
WARNING FILTER indicator on the top panel lights up (see
below). Stop using the projector immediately and replace
the filter cartridge.
Blocking the air vents and leaving the projector uncleaned
for a long time may not only damage the projector and may
require costly repairs but may also cause accidents or fire.
For maintenance of the filter, refer to “Filter counter” on
page 65 and “Maintenance and Care” on pages 66-68.
Damages to the projector caused by using an
uncleaned filter or improper maintenance will void the
warranty on the projector.
IMPORTANT!
Filter Maintenance!!
Top Panel
WARNING FILTER
indicator
Fig. 1 Filter replacement icon
Fig. 2 Filter cartridge
replacement icon
Safety Instructions
Air Circulation
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 91 92

Comments to this Manuals

No comments