Sanyo PLCWM5500L Owner's Manual download pdf (Page 71)

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that

contains a small amount of non-abrasive camera lens cleaner,

or use a lens cleaning paper or commercially available air

blower to clean the lens.

Avoid using an excessive amount of cleaner. Abrasive

cleaners, solvents, or other harsh chemicals might scratch the

surface of the lens.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a soft dry cleaning cloth.

When the cabinet is heavily soiled, use a small amount of

mild detergent and finish with a soft dry cleaning cloth. Avoid

using an excessive amount of cleaner. Abrasive cleaners,

solvents, or other harsh chemicals might scratch the surface

of the cabinet.

When the projector is not in use, put the projector in an

appropriate carrying case to protect from dust and scratches.

Maintenance and Care

Cleaning the Projection Lens

Cleaning the Projector Cabinet

Do not use any flammable solvents or air sprays on the projector and in its vicinity. The explosion or fire hazard

may occur even after the AC power cord is unplugged because the temperature inside the projector is extremely

high due to the lamps. In addition, there is a risk that the internal parts may be damaged not only by the

flammable air spray but also by the cold air.

CAUTION

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 91 92

No comments

Sanyo PLCWM5500L Owner's Manual Page 71