Sanyo 32LM5R Instruction Manual download pdf (Page 5)

■ Connect the display unit to VGA, BNC and Scart

connector as required.

1. Connect the IEC power connector to the mains coupler at the rear

of the LCD monitor as shown above.

2. Connect the power cord of the LCD monitor to a wall outlet.

✐ As this product does not have a mains On/Off switch, please

ensure your mains plug is easily accessible.

✐ The LCD monitor is prepared for a mains voltage AC100~240V,

50Hz/60Hz. To completely switch off the mains, or when the dis-

play unit is not to be used for an extended period of time, it is

advisable to disconnect the power cord from the power outlet.

✐ Please use the correct mains lead supplied with the set for your

area.

3. Warning: To prevent injury, the unit must be securely attached to

the wall in accordance with the installation instructions.

■ INPUT selection

To switch between AV1, RGB, AV2 (RGB H/V or Y, Pb, Pr) AV3, DVI

or PC mode press the TV/ AV button on your remote control

repeatedly or press and hold the TV/AV button for a few seconds and

a selection menu will appear on screen.Use the

5 or 6

buttons to

select the correct input.

AV1

SCART connection.

RGB

TTL input (5V RGB signals) into SCART terminal.

3. Y,Pb,Pr/ RGBHV connection (AV2)

This LCD monitor has a choice of Y, Pb, Pr or RGB H/V connections.

You can connect your DVD player to the Y, Pb, Pr terminals instead

of using a scart lead. This can support high definition in analogue

component form. RGB H/V can be used as a PC input via the BNC

terminals.Both options support a large range of resolutions (page 12).

AV3

Composite (CVBS) signal input

AV3 OUT is to output the composite video signal from the

VIDEO IN so that you can connect monitors with the use of a

loop through function.

5. RS232C IN/OUT: Is a input for external commands to control the

monitor (see page 9).

6. DVI-D (Digital Video Interface)

This monitor has a DVI connector. This is located at the back of the

monitor next to the phono sockets. This input will support a large

range of resolutions as shown on page 12. See page 7 for details of

menu operation.

7 PC connection

This LCD monitor has a PC connector (PC-IN D-SUB).You can

connect a PC to the LCD monitor and use it as a monitor display (see

page 8). This input will support a large range of resolutions (see

pg12). Audio can be connected via the 3.5mm PC audio in socket.

8. External Audio Output

To output the audio signal from AV 1,2,3, PC and DVI. The

speaker impedance should be 8 ohms.

9. Use of Monitor Audio Output Connections

The audio monitor out sockets on the rear of the set provide a fixed

level audio output for reproducing sound via your audio equipment.

INST

ALLA

TION

Step : 1 Mains Connection

AC Mains Outlet

WARNING! High voltages are used in the operation of

this set. Refer service to qualified service personnel.

DVI-D

/DVI-D

GB GB

Step : 2 Connections

DVI-D

/DVI-D

DVI-D

/DVI-D

DVI-D

/DVI-D

1 2 3 4 5 6 7 8 9 10 ... 67 68

Comments to this Manuals

No comments

Sanyo 32LM5R Instruction Manual Page 5

Comments to this Manuals

Related products and manuals for LED displays Sanyo 32LM5R