Sanyo MBR-1404GR User Manual download pdf (Page 21)

ROUTINE MAINTENANCE

Cleaning of evaporating tray

1. Remove the evaporating tray installed on the back of the

frame by lifting the tray.

2. Wash away any accumulated dirt in the evaporating tray.

3. After cleaning of the evaporating tray, return it to the

original position.

Replacement of fluorescent light

1. The fluorescent light is placed vertically at the center of

the frame.

2. Disconnect the power supply plug.

3. When replacing the fluorescent light, remove all shelves

or drawers.

4. In the case of MBR-1404GR, after removing all drawers,

remove the rail that is placed vertically at the center of the

frame.

5. Pull the fluorescent light towards the rear together with

the cover, as shown in Fig. 1, together with the wiring.

6. Take out the fluorescent light and remove the connector

water-proofing rubber at both ends. As shown in Fig. 2,

shift the rubber by rolling it.

7. Remove the connector, as shown in Fig. 3.

8. Next, pull out the fluorescent light. Pull gently from the

cover.

9. After replacing the new fluorescent light, return it to the

original position.

Evaporating tray

Connector

Light

Cover

Connector water-

proofing rubber

Fig. 3

Connector

Fig. 2

Fig. 1

1 2 ... 16 17 18 19 20 21 22 23 24 25 26

No comments

Sanyo MBR-1404GR User Manual Page 21