Sanyo PLC-EF60A Owner's Manual download pdf (Page 38)

PC System Menu

Custom Mode

(1~50) set in the

PC Adjust Menu.

(p41, 42)

This projector automatically tunes to various types of computers

based on VGA, SVGA, XGA, SXGA, UXGA, or WXGA with its Multi-

scan system and Auto PC Adjustment. If Computer source is

selected in the Source Select Menu, this projector automatically

detects the signal format and tunes to project a proper image

without any additional setting. (Signal formats provided in this

projector is shown on pages 70~71 )

When the projector has difficulty in recognizing the connected

signal conforming to PC Systems provided in this projector,

several systems are displayed. Select one from them manually.

When the image is not projected properly, manual adjustment is

required. (p.41~42)

There is no signal input from computer. Check the

connection of your computer and the projector. (See

“Troubleshooting” on page 68)

-----

✔Note:

The projector may display one of the following messages.

User preset system manually adjusted in PC Adjust

menu. Adjustment data can be stored in Mode 1~50.

(p.41~42)

Mode 1

*SVGA 1 and Mode 1 are examples.

selects system of the connected computer and video source.

PC Systems provided in the projector. The projector

chooses a proper system and displays it.

SVGA 1

Press the MENU button to display On-Screen Menu. Spin

Menu icons with the Point buttons (7 and 8) or the Control

pad and press the SELECT button when the SYSTEM icon

comes right in front.

Move the yellow frame pointer with the Point buttons (e

and d) or the Control pad to a proper system, and then

press the SELECT button.

The system being selected.

PC System Selection

Selecting PC System Manually

Auto

System

System icon

System

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 81 82

Comments to this Manuals

No comments

Sanyo PLC-EF60A Owner's Manual Page 38

Comments to this Manuals

Related products and manuals for Data projectors Sanyo PLC-EF60A