Sanyo PLC-EF60A Owner's Manual download pdf (Page 40)

Move the yellow

frame pointer to the

Auto PC adj. and

press the SELECT

button.

PC Adjust Menu

PC ADJ. icon

To store adjustment parameters

Adjustment parameters from Auto PC Adjustment can be

memorized in this projector. Once parameters are memorized, the

setting can be done just by selecting Mode in the System menu

(p.38). See Store on page 42.

✔Note:

• Fine sync, Total dots and Picture Position of some computers can not be fully

adjusted with this Auto PC Adjustment function. When the image is not provided

properly with this operation, manual adjustments are required. (p.41, 42)

• Auto PC Adjustment function cannot be operated in Digital Signal input on DVI

terminal and 480i, 575i, 480p, 575p, 720p (HDTV), 1035i (HDTV), 1080i/50

(HDTV), or 1080i/60 (HDTV) is selected on the System menu . (p.39)

Move the yellow frame pointer to Auto PC adj. and then

press the SELECT button twice.

This Auto PC Adjustment can be also executed by pressing

the AUTO PC ADJ. button on the top control or the AUTO

PC button on the remote control unit. (p.15, 30)

Auto PC adj.

selects Auto PC adj., Fine sync, Total dots, Current mode, Clamp, Display

area, Position, V -sync phase, Reset, and Mode.

Press the MENU button to display On-Screen Menu. Spin

Menu icons with the Point buttons (7 and 8) or the Control

pad and press the SELECT button when the PC ADJ. icon

comes right in front.

Auto PC Adjust

PC Adjustment

Computer Adjustment

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 81 82

No comments

Sanyo PLC-EF60A Owner's Manual Page 40