Sanyo PLC-WTC500AL Owner's Manual download pdf (Page 40)

Use the Point 7 8 buttons to adjust the horizontal area

displayed by this projector.

Display area H

Use the Point 7 8 buttons to adjust the vertical area

displayed by this projector.

Display area V

Reset

Store

Exit the PC Adjust Menu.

Quit

To store the adjusted data, select Store and then press the

SELECT button. Move the red arrow pointer to one of the

Modes 1 to 10 in which you want to store, and then press

the SELECT button.

To reset the adjusted data, select Reset and press the

SELECT button. A confirmation box appears and then select

[Yes]. All adjustments will return to their previous figures.

Mode free

Vacant Values of “Total dots,”

“Horizontal,” “Vertical,”

“Display area H,” and

“Display area V.”

Close this dialog box.

To clear the stored data, select Mode free and then press

the SELECT button. Move the red arrow pointer to the

Mode that you want to clear and then press the SELECT

button.

✔Notes:

 •Displayarea(H/V)cannotbeselectedwhen480i,

575i,480p,575p,720p,1035i,or1080iisselectedin

thePCSystemMenu(p.37).

 •PCAdjustMenucannotbeselectedwhenInput

1[RGB(PCdigital)]isselectedintheInputMenu

(p.35).

Move the red frame pointer to

the desired item and press the

SELECT button.

To clear the adjusted data

This Mode has

stored parameters.

To store the adjusted data

Computer Adjustment

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 88 89

No comments

Sanyo PLC-WTC500AL Owner's Manual Page 40