Sanyo PLC-WM5500 User Manual download pdf (Page 13)

ENGLISH

*1 Set "On" only when the DHCP server is available on your network environment.

*2 Set [255.255.255.255] if the network does not provide the gateway (router).

*3 Set [255.255.255.255] if you do not use the function E-mail alert.

3. Select "Network setting" in the Network menu and press SELECT button, and then the

LAN setting screen will appear and selected LAN settings will be displayed. Adjust each

item to the setting environment. Consult your system administrator about the detailed

settings.

Press

SELECT button in a row where you want to adjust, and adjust the figures with the

Point ed buttons and move among the items with the Point 7 8 buttons, and then

press SELECT button to fix. Move to the next row with the Point ed buttons to adjust.

4. After completing all the settings, select “Set” and press SELECT button. Now, all

procedures have been done. To cancel the adjusted settings, select "Cancel" and press

SELECT button.

You can confirm the LAN settings you have made from “Network information” (p.14). In

such cases that the LAN cannot be connected, see this screen.

Network setting

DHCP: On

Item Description

DHCP .................... Sets DHCP function On or Off. When you setup the network setting manually, select

"Off". When it is set On, IP address, Subnet, Gateway and DNS are automatically set

according to your network environment *

IP address .............

Sets IP address of the projector

Subnet ....................Sets Subnet mask. Normally sets 255.255.255.0

Gateway*

.............Sets IP address of the default gateway (Router)

DNS*

....................... Sets IP address of the DNS server.

DHCP: Off

Network configuration

* The numerical value is a setting example.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 59 60

No comments

Sanyo PLC-WM5500 User Manual Page 13