Sanyo DSR-2108 User Manual Page 40
- Page / 92
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
LIVE settings
33
2 Select the setting position (4 positions) using the control
button (}~).
3 Select the input terminal number (1 - 16) using the control
button ({|).
☞ In DSR-2108, input terminal number (1 - 8).
4 Press the ENTER button.
● Setting the VIDEO LOSS ON
An alarm signal is output when the specified video input
terminal receives a VIDEO LOSS occurs.
1 Select "VIDEO LOSS ON" using the control button ({|).
2 Select the setting position (4 positions) using the control
button (}~).
3 Select the input terminal number (1 - 16) using the control
button (}~).
☞ In DSR-2108, input terminal number (1 - 8).
4 Press the ENTER button.
● Setting the HDD ERROR
An alarm signal is output when a hard disk error occurs.
1 Select "HDD ERROR" using the control button ({|).
2 Select output ON or OFF using the control button (}~).
● Setting the ALARM DURATION
Sets the duration of the alarm output signal.
1 Select "ALARM DURATION" using the control button
({|).
2 Select the output duration (3 - 255 seconds) using the
control button (}~).
4
Select "ALARM IN NO." using the control button
({|) and specify the alarm input terminal number
(1-16) using the control button (}~).
Setting the signal polarity of the specified alarm
input terminal.
☞ In DSR-2108, input terminal number (1 - 8).
● Setting the TYPE
1 Select "TYPE" using the control button ({|).
2 Set the signal polarity using the control button (}~).
---: Does not react
N/OPEN (Normal Open):
Normally open, reacts when closed
N/CLOSE (Normal Close):
Normally closed, reacts when opened
Sets the output conditions of the monitor video terminal
(MON2).
1
Select "MON2-OUT" using the control button ({|)
and press the ENTER button.
The MON2-OUT screen is displayed.
2
Setting the output conditions of the MON2 terminal
● Setting the MON2 TYPE
Sets the output screen layout of the MON2 terminal.
1 Select "MON2 TYPE" using the control button ({|).
2 Select the screen layout using the control button (}~).
FULL: Single-screen output
QUAD: Quad-screen output
● Setting the MON2 ON EVENT
Sets whether the video of an event is output to the MON2
terminal while it is being recorded.
1 Select "MON2 ON EVENT" using the control button ({|).
2 Select ON or OFF using the control button (}~).
ON: The video of the event is output.
OFF: The video of the event is not output.
● Setting the MON2 EVENT DWELL TIME
If "MON2 ON EVENT" is set to ON, set the output duration of
the video of the event.
1 Select "MON2 EVENT DWELL TIME" using the control
button ({|).
2 Set the output duration (1 - 10 seconds) using the control
button (}~).
E F
Setting the MON2 (Monitor2)-OUT
MON2-OUT
MON2 TYPE FULL
MON2 ON EVENT ON
MON2 EVENT DWELL TIME 10 SEC
SEQUENCE OFF
SEQUENCE-DWELL TIME 10 SEC
MON2 CHANNEL 1
L8HBT_WA(DSR-2116_2108)(GB).book 33 ページ ２００９年５月２７日 水曜日 午後４時５０分
- DSR-2116 1
- DSR-2108 1
- Table of Contents 2
- Safety precautions 3
- Main Features 8
- Main parts 8
- Accessories 8
- About the split 9
- Names and functions of parts 10
- Rear panel 11
- Basic connections 11
- Network connection (LAN) 12
- RS-485/422 13
- Switching the power on / off 14
- Pre-operation preparation 15
- Monitoring the camera videos 19
- Operating the PTZ dome camera 21
- Recording 23
- POWERMODEAUTOMENU 25
- Playing back recorded videos 28
- 2009/04/12 10:00:00 30
- 2009/04/12 11:00:00 30
- 2009/04/12 11:25:00 30
- 2009/05/03 09:04:54 33
- 2009/04/14 17:25:37 34
- Setting the security lock 35
- MAIN MENU 36
- LIVE settings 38
- RECORD settings 42
- SYSTEM settings 44
- NETWORK settings 49
- IP ADDRESS 51
- 172.016.001.052 51
- HDD SET settings 54
- SERVICE settings 56
- Operations using the Network 57
- Connecting to this unit 59
- Main screen basic operations 62
- Search mode operations 66
- Setup menu settings 69
- Remote Setup 73
- Input example: 83
- Video display area 83
- Operation 83
- Log window 83
- Time scale panel 84
- Slide knob 84
- • f button 86
- • e button 86
- • button 86
- Specifications 87
- SANYO Electric Co., Ltd 92
Related products and manuals for Car DVR Sanyo DSR-2108
Car DVR Sanyo DSR-2004 User Manual
(2 pages)
(2 pages)
Car DVR Sanyo DSR-5716P User Manual
(236 pages)
(236 pages)
Car DVR Sanyo ICR-B34 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B31 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo DSR-M800 User Manual
(50 pages)
(50 pages)
Car DVR Sanyo DSR-M814 User Manual
(73 pages)
(73 pages)
Car DVR Sanyo DSR - 300 User Manual
(136 pages)
(136 pages)
Car DVR Sanyo DSR-2016 User Manual
(2 pages)
(2 pages)
Car DVR Sanyo DSR-3016 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B29 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B35 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 0.432 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals