Sanyo DSR - 300 User Manual download pdf (Page 104)

MENU-SPECIFIC SETTINGS2

English 103

(when optional interface board is installed)

Set conditions for normal recording and timer recording as

described below.

Set the picture quality for recording to the normal recording

area as follows.

1 Select “PICTURE QUALITY”.

[Settings] ( indicates default setting.)

2 Select “FRAME” or “FIELD” recording.

[Settings] ( indicates default setting.)

Audio can be recorded together with images when

performing normal recording.

Note, however, that since this audio data will also be

stored in the normal recording area, the recording time for

this area will be reduced.

3 Select “AUDIO RECORDING”.

[Settings] ( indicates default setting.)

z Audio recording can only be specified when the

recording rate is more than A 5.00/10.00 FPS.

Set the recording rate for normal recording as follows.

(Default setting: A 5.00/10.00 FPS)

4 Select the recording rate for normal

recording.

A 30.00/60.00, A 15.00/30.00, A 10.00/20.00, A 7.50/15.00,

A 5.00/10.00, 3.75/7.50, 3.00/6.00, 2.50/5.00, 2.14/4.29,

1.88/3.75, 1.67/3.33, 1.50/3.00, 1.36/2.73, 1.15/2.31,

1.00/2.00, 0.83/1.67, 0.71/1.43, 0.63/1.25, 0.56/1.11,

0.50/1.00, 0.25/0.50, 0.17/0.33, 0.13/0.25, 0.10/0.20,

0.05/0.10, 0.03/0.05, 0.02/0.03 (Unit: FPS)

Selecting setting values

Image resolution is determined by the product of picture

quality and recording rate. The higher the picture quality

and the faster the recording rate, the better the image

resolution; however, as higher resolution requires more

storage capacity, the recording time will be reduced

accordingly.

z The recording rate will be limited between A 10.00/

20.00 and 0.50/1.00 FPS when the setting for pre-alarm

recording is “ON”.

z The recording rate for timer recording should be set

separately using the TIMER SET menu. (JP. 104)

5 Click [SAVE].

The new setting is saved.

6. NORMAL REC MODE SET

Setting the picture quality for recording

Setting Description

SUPER FINE Super Fine

FINE Fine

ENHANCED Enhanced

NORMAL Normal

BASIC Basic

Setting Description

FIELD

Sets the recording method to field. This is the

normal recording method.

FRAME

Sets the recording method to frame. This

method is used when the resolution of

still-type images must be improved. Note,

however, that this method is not suitable for

fast-moving images as they can become

blurred.

Setting audio recording

Setting Description

ON Audio will be recorded.

OFF Audio will not be recorded.

Setting the recording rate

e00_l8had_us_7.book Page 103 Wednesday, March 10, 2004 2:47 PM

1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 135 136

Comments to this Manuals

No comments

Sanyo DSR - 300 User Manual Page 104

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR - 300