Sanyo DSR - 300 User Manual Page 12
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
REPLACING A REMOVABLE HDD2
English 11
5 Insert the tray release key, turn it in the
direction of the arrow, and then press
the [CHANGE DISK] button.
The HDD indicator will light up and the CHANGE DISK
indicator will switch from green to red.
z Whenever the unit is to be transported, ensure that the
HDD tray is removed from the unit and packaged
separately
.
z Correct operation cannot be guaranteed with HDDs not
recorded to using a DSR-300. If you want to use a HDD
that has been recorded on by a different DVR, be sure
to initialize it before use.
z Even if the tray to which the HDD has been attached is
connected directly to a PC, the playback of images will
not be possible.
z If you cannot turn the tray release key when installing
the HDD tray, the HDD tray may have shifted.
Reposition the HDD tray properly.
1 With the power turned on, press and
hold the [CHANGE DISK] button for at
least 2 seconds.
The CHANGE DISK indicator changes from red to flashing
green, then lights steadily after 10 seconds. A buzzer
sounds intermittently in time with the indicator’s flashing.
The HDD indicator turns off.
2 When the CHANGE DISK indicator
lights in green and the HDD indicator
turns off, insert the tray release key and
turn it in the direction of the arrow.
This action will cause the HDD tray lock to be released.
z
An alarm will be sounded if the tray release key is turned
when the CHANGE DISK indicator is lit in red or before
the HDD indicator has turned off. Do not remove the HDD
tray while such an alarm is sounding. Failure to observe
this precaution can result in data being damaged.
z Do not forcibly pull out the HDD tray when the tray
release key is ON as this will result in the tray being
damaged.
z If you cannot turn the tray release key when installing
the HDD tray, the HDD tray may have shifted.
Reposition the HDD tray properly.
z Because data might be damaged, a warning tone will
sound if the tray release key is turned without pressing
the [CHANGE DISK] button while the power is on.
z
If the HDD is removed without using the [CHANGE DISK]
button, there is a danger that recorded data may be lost.
z The [CHANGE DISK] button is disabled during
recording or timer recording stanby.
CHANGE DISK
indicator
Removal
[CHANGE DISK] button
HDD indicator
CHANGE DISK
indicator
e00_l8had_us_7.book Page 11 Wednesday, March 10, 2004 2:47 PM
- PRECAUTION 2
- INTRODUCTION 3
- Symbols used in this manual 4
- Copyright 4
- CONTENTS 5
- SETTINGS 6
- 6 English 7
- NETWORK OPERATION 8
- 1 BEFORE USE 9
- English 9 10
- 2 REPLACING A REMOVABLE HDD 11
- REPLACING A REMOVABLE HDD2 12
- 12 English 13
- NAMES AND FUNCTIONS OF PARTS 14
- 14 English 15
- NAMES AND FUNCTIONS OF PARTS3 16
- Rear panel 16
- INSTALLATION AND CONNECTIONS 17
- INSTALLATION AND CONNECTIONS4 18
- Connecting a multiplexer 18
- 18 English 19
- 1 PREPARING FOR USE 20
- 20 English 21
- 2 SETTING THE LANGUAGE/CLOCK 22
- 22 English 23
- 1 Press the 24
- 2 Press the [TIMER] button 24
- ALARM AND PRE-ALARM RECORDING 25
- 1 Set pre-alarm recording 26
- 26 English 27
- 2 Press the [STILL] button 28
- 3 Press the [ ] button 29
- SEARCHING FOR RECORDED IMAGES 30
- 4 Press the [ ] button 31
- ALARM THUMBNAIL SEARCH 32
- TIME/DATE SEARCH 32
- 5 Press the [ ] button 33
- ARCHIVE AREA SEARCH 34
- MOTION DETECTION SEARCH 34
- 6 Press the [ ] button 35
- 7 Press the [ ] button 35
- 8 Set the motion sensor 35
- English 35 36
- 36 English 37
- To cancel a copy operation 38
- 38 English 39
- 8 SAVING MENU SETTINGS 41
- SAVING MENU SETTINGS8 42
- 1 Press the [MENU] button 43
- English 43 44
- 44 English 45
- English 45 46
- 46 English 47
- Field recording 48
- Frame recording 48
- 48 English 49
- 1 LANGUAGE/CLOCK SET 50
- 50 English 51
- 2 VIDEO INPUT SET 53
- 3 RECORDING AREA SET 54
- 54 English 55
- RECORDING AREA SET3 56
- Setting overwrite permission 56
- 4 RECORDING CONDITIONS SET 57
- 2 Press the [ ] button 58
- 5 NORMAL REC MODE SET 60
- 6 TIMER SET 61
- TIMER SET6 62
- 62 English 63
- 7 HOLIDAY SET 64
- 8 ALARM REC MODE SET 65
- 7 Move the cursor to “ALARM 66
- 66 English 67
- ALARM REC MODE SET8 68
- Setting the motion sensor 68
- 1 DISPLAY/VIDEO LOSS SET 69
- 2 RS-232C/RS-485 SET 70
- 70 English 71
- 3 BUZZER SET 72
- 4 SECURITY LOCK SET 73
- SECURITY LOCK SET4 74
- Setting passwords 74
- 74 English 75
- 5 NETWORK SET 77
- NETWORK SET5 78
- Making network settings 78
- 78 English 79
- 6 HDD SET 80
- 7 POWER FAILURE/USED TIME 81
- 1 INTERFACE SPECIFICATIONS 82
- 82 English 83
- INTERFACE SPECIFICATIONS1 84
- Commands 84
- 84 English 85
- 86 English 87
- 88 English 89
- Manual for 91
- Remote Operation 91
- 1 NETWORK CONTROL FUNCTION 92
- 92 English 93
- PREPARING FOR NETWORK CONTROL 94
- 94 English 95
- Controlling from the unit 96
- 96 English 97
- 1 SETTINGS 98
- 98 English 99
- 2 MENU-SPECIFIC SETTINGS 100
- 100 English 101
- MENU-SPECIFIC SETTINGS2 102
- 4. RECORDING AREA SET 102
- 4 Click [SAVE] 103
- 1 Select “PICTURE QUALITY” 104
- 3 Select “AUDIO RECORDING” 104
- 5 Click [SAVE] 104
- 2 Click [SAVE] 105
- 4 Select a mode using “ALARM 107
- 5 Select “REC RATE” 107
- 13 Click [SAVE] 109
- 14. HDD SET 112
- 15. POWER FAILURE/USED TIME 112
- 1 RECORDING IMAGES 113
- 2 WATCHING IMAGES 114
- 114 English 115
- WATCHING IMAGES2 116
- Adjusting the image and audio 116
- Screen display items 116
- 116 English 117
- 4 Click [BROWSE] 118
- 5 Click [OK] 118
- 6 Click [START] 118
- 3 SEARCH MODE 119
- 4 OPERATIONS IN SEARCH MODES 120
- 120 English 121
- OPERATIONS IN SEARCH MODES4 122
- 5. MOTION DETECTION SEARCH 122
- 5 SAVING RECORDED IMAGES 123
- SAVING RECORDED IMAGES5 124
- Downloading to a PC 124
- 124 English 125
- 6 DVR VIEWER 126
- 126 English 127
- DVR VIEWER6 128
- Opening files 128
- 128 English 129
- 2 To print thumbnail images 131
- 4 To display titles 131
- 2 Click [Start Copy] 132
- SPECIFICATIONS 133
- Dimensions 134
- OBLIGATIONS 135
- EXCLUSIONS 135
- ATTENTION 135
- SANYO INDUSTRIAL 135
Related products and manuals for Car DVR Sanyo DSR - 300
Car DVR Sanyo DSR-2016 User Manual
(2 pages)
(2 pages)
Car DVR Sanyo DSR-3016 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B29 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B35 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 0.140 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals