Sanyo DSR - 300 User Manual download pdf (Page 94)

English 93

(when optional interface board is installed)

2 PREPARING FOR NETWORK CONTROL

1 Launch the PC’s web browser.

Internet Explorer versions 5.0 and later are supported.

In terms of OS, Windows 98, 98SE, Me, 2000, and XP are

supported.

z If the Java Script run-time error message is displayed

while Internet Explorer is being used, modify that

application’s settings as follows:

(1) Select menus in the sequence [Tools] → [Internet

Options] → [Advanced].

(2) Set the [Browsing] checkbox as follows.

2 Enter the URL.

Enter the unit’s URL in the browser’s address bar and then

press [Enter]. (Note that the URL should contain the IP

address specified using the unit’s network settings.)

To start, enter “http://192.168.0.1/” as the default setting.

z If a value other than “80” is set as the default port value,

enter a colon (:) and then the port number after the IP

address.

For example, if the port number was set as “81”, you

should enter

http://192.168.0.1:81/

z If no web browser is installed on the PC, Internet

Explorer must be installed before proceeding.

3 Enter a password (for verification

purposes).

Enter a [User name] and a verification-use [Password] on

the [Connect to 192.168.0.1] screen, and then click [OK].

If you entered an incorrect password, the password entry

screen will appear once again and you will be prompted to

re-input the password.

z Passwords should be setup in advance for the

hardware environment's different user levels. At the

time of purchase, the password settings (i.e., user

name and password) will be as described on P. 110.

z If you save the [User name] and [Password] that have

been entered, verification will be carried out

automatically on subsequent occasions, and they will

not need to be entered again. Note, however, that it

may not be possible to save a password other than that

used for the default connection.

z Up to four PCs can be connected simultaneously to a

single DVR. Note, however, that users with user level

ID2 or ID3 are restricted to use of one PC.

z When four PCs are connected and access is made from

a different PC using the highest user level, the most-

recent user of a lower level to have accessed the unit

will be automatically disconnected and priority will be

given to the upper-level user.

An error message will appear on the disconnected

user's PC. (JP. 95)

z When [Cancel] is clicked after repeated input of an

incorrect password, the authentication error message

will be displayed.

z Even if computer control is being carried out, clicking a

button for which you do not have authorization will

result in the password input screen being displayed to

verify allocation of the required user level.

Controlling from a PC

e00_l8had_us_7.book Page 93 Wednesday, March 10, 2004 2:47 PM

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 135 136

Comments to this Manuals

No comments

Sanyo DSR - 300 User Manual Page 94

Comments to this Manuals

Related products and manuals for Car DVR Sanyo DSR - 300