Sanyo DSR - 300 User Manual Page 25
- Page / 136
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
24 English
OPERATION
4 ALARM AND PRE-ALARM RECORDING
Follow the procedures below to have the digital video
recorder record an alarm image only when alarm input is
detected.
z Confirm that the cable of the device required for alarms
is connected to the ALARM terminal. (JP. 16)
z When the motion sensor is set, an alarm image is
recorded when a moving subject is detected. (JP. 67)
1 Set alarm recording.
The default settings are shown below.
See P. 65 for how to change these settings.
z “ALARM RECORDING”: “OFF”
Alarm recording is disabled.
z “DURATION”: “1 SEC”
Recording is performed for 1 second for each alarm
signal received while the alarm is set.
2 When alarm input is detected
When an alarm is generated, the display below appears in
the operation display area, and an alarm image is
recorded.
z “ALARM” appears in the operation display area.
z When an alarm is generated on a channel that is
already alarm recording, the alarm recording time is
extended counting from that moment. The new alarm is
not counted.
z The latest 9,999 alarms are displayed in the alarm
history (recording list). (Although the history can record
up to 16,000 items, only 9,999 of these can be
displayed on-screen.)
z The panel’s ALARM indicator flashes.
z If an alarm occurs during normal recording or timer
recording, the recording operation will be ended, and it
will restart after the end of alarm recording.
z When the normal recording area is set to “*1%”, alarm
recording is possible for the complete memory available
in the alarm recording area. For “1%” and other
settings, up to 16,000 items are recorded per hard disk.
However, if set for *1%, “ALARM SEARCH”, “ALARM
THUMBNAIL SEARCH”, and “MOTION DETECTION
SEARCH” will not be available. Use “TIME/DATE
SEARCH” instead.
Furthermore, since the alarm skip function will also be
inactive, it will be necessary to carry out fast-forward
and fast-rewind playback.
3 End alarm recording.
When the alarm duration time ends (default setting: 1
second), “ALARM” disappears from the operation display,
the ALARM indicator stops flashing, and recording stops.
z When the space remaining in the alarm recording area
drops below the setting value, the FULL indicator lights
and recording stops. You can start recording from the
beginning again by changing the recording setting.
(JP. 57)
If recording is ended during alarm recording
using the motion sensor
Set “LEVEL” from the motion sensor screen to “OFF”.
(JP. 67)
[EXIT/OSD] button
ALARM FULL indicator
ALARM indicator
FULL indicator
Alarm recording
Counts the number
of alarms.
z
05- 10- 04 ALARM 0001
10: 50: 00 EN 10FPS
e00_l8had_us_7.book Page 24 Wednesday, March 10, 2004 2:47 PM
- PRECAUTION 2
- INTRODUCTION 3
- Symbols used in this manual 4
- Copyright 4
- CONTENTS 5
- SETTINGS 6
- 6 English 7
- NETWORK OPERATION 8
- 1 BEFORE USE 9
- English 9 10
- 2 REPLACING A REMOVABLE HDD 11
- REPLACING A REMOVABLE HDD2 12
- 12 English 13
- NAMES AND FUNCTIONS OF PARTS 14
- 14 English 15
- NAMES AND FUNCTIONS OF PARTS3 16
- Rear panel 16
- INSTALLATION AND CONNECTIONS 17
- INSTALLATION AND CONNECTIONS4 18
- Connecting a multiplexer 18
- 18 English 19
- 1 PREPARING FOR USE 20
- 20 English 21
- 2 SETTING THE LANGUAGE/CLOCK 22
- 22 English 23
- 1 Press the 24
- 2 Press the [TIMER] button 24
- ALARM AND PRE-ALARM RECORDING 25
- 1 Set pre-alarm recording 26
- 26 English 27
- 2 Press the [STILL] button 28
- 3 Press the [ ] button 29
- SEARCHING FOR RECORDED IMAGES 30
- 4 Press the [ ] button 31
- ALARM THUMBNAIL SEARCH 32
- TIME/DATE SEARCH 32
- 5 Press the [ ] button 33
- ARCHIVE AREA SEARCH 34
- MOTION DETECTION SEARCH 34
- 6 Press the [ ] button 35
- 7 Press the [ ] button 35
- 8 Set the motion sensor 35
- English 35 36
- 36 English 37
- To cancel a copy operation 38
- 38 English 39
- 8 SAVING MENU SETTINGS 41
- SAVING MENU SETTINGS8 42
- 1 Press the [MENU] button 43
- English 43 44
- 44 English 45
- English 45 46
- 46 English 47
- Field recording 48
- Frame recording 48
- 48 English 49
- 1 LANGUAGE/CLOCK SET 50
- 50 English 51
- 2 VIDEO INPUT SET 53
- 3 RECORDING AREA SET 54
- 54 English 55
- RECORDING AREA SET3 56
- Setting overwrite permission 56
- 4 RECORDING CONDITIONS SET 57
- 2 Press the [ ] button 58
- 5 NORMAL REC MODE SET 60
- 6 TIMER SET 61
- TIMER SET6 62
- 62 English 63
- 7 HOLIDAY SET 64
- 8 ALARM REC MODE SET 65
- 7 Move the cursor to “ALARM 66
- 66 English 67
- ALARM REC MODE SET8 68
- Setting the motion sensor 68
- 1 DISPLAY/VIDEO LOSS SET 69
- 2 RS-232C/RS-485 SET 70
- 70 English 71
- 3 BUZZER SET 72
- 4 SECURITY LOCK SET 73
- SECURITY LOCK SET4 74
- Setting passwords 74
- 74 English 75
- 5 NETWORK SET 77
- NETWORK SET5 78
- Making network settings 78
- 78 English 79
- 6 HDD SET 80
- 7 POWER FAILURE/USED TIME 81
- 1 INTERFACE SPECIFICATIONS 82
- 82 English 83
- INTERFACE SPECIFICATIONS1 84
- Commands 84
- 84 English 85
- 86 English 87
- 88 English 89
- Manual for 91
- Remote Operation 91
- 1 NETWORK CONTROL FUNCTION 92
- 92 English 93
- PREPARING FOR NETWORK CONTROL 94
- 94 English 95
- Controlling from the unit 96
- 96 English 97
- 1 SETTINGS 98
- 98 English 99
- 2 MENU-SPECIFIC SETTINGS 100
- 100 English 101
- MENU-SPECIFIC SETTINGS2 102
- 4. RECORDING AREA SET 102
- 4 Click [SAVE] 103
- 1 Select “PICTURE QUALITY” 104
- 3 Select “AUDIO RECORDING” 104
- 5 Click [SAVE] 104
- 2 Click [SAVE] 105
- 4 Select a mode using “ALARM 107
- 5 Select “REC RATE” 107
- 13 Click [SAVE] 109
- 14. HDD SET 112
- 15. POWER FAILURE/USED TIME 112
- 1 RECORDING IMAGES 113
- 2 WATCHING IMAGES 114
- 114 English 115
- WATCHING IMAGES2 116
- Adjusting the image and audio 116
- Screen display items 116
- 116 English 117
- 4 Click [BROWSE] 118
- 5 Click [OK] 118
- 6 Click [START] 118
- 3 SEARCH MODE 119
- 4 OPERATIONS IN SEARCH MODES 120
- 120 English 121
- OPERATIONS IN SEARCH MODES4 122
- 5. MOTION DETECTION SEARCH 122
- 5 SAVING RECORDED IMAGES 123
- SAVING RECORDED IMAGES5 124
- Downloading to a PC 124
- 124 English 125
- 6 DVR VIEWER 126
- 126 English 127
- DVR VIEWER6 128
- Opening files 128
- 128 English 129
- 2 To print thumbnail images 131
- 4 To display titles 131
- 2 Click [Start Copy] 132
- SPECIFICATIONS 133
- Dimensions 134
- OBLIGATIONS 135
- EXCLUSIONS 135
- ATTENTION 135
- SANYO INDUSTRIAL 135
Related products and manuals for Car DVR Sanyo DSR - 300
Car DVR Sanyo DSR-2016 User Manual
(2 pages)
(2 pages)
Car DVR Sanyo DSR-3016 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B29 User Manual
(96 pages)
(96 pages)
Car DVR Sanyo ICR-B35 User Manual
(32 pages)
(32 pages)
© 2020, manymanuals.com. All rights reserved. | 1.858 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals