Sanyo PID-42NE1 Operations Instructions download pdf (Page 42)

Options Adjustments

Item Adjustments

Button lock

Off

On MENU&ENTER

Off: Allthebuttonsonmainunitcanbeused.

MENU&ENTER: Locks

and

ENTER/

buttons on main unit.

On: Locksallthebuttononmainunit.

SetsButtonlockwiththeunitbuttonsinthefollowingprocedure.

Off: Press

fourtimes→Press

INPUT

fourtimes→Press fourtimes→Press

ENTER/

MENU&ENTER: Press

ENTER/

fourtimes→Press fourtimes→Press

INPUT

fourtimes→Press

ENTER/

On: Press fourtimes→Press

ENTER/

fourtimes→Press fourtimes→Press

ENTER/

Remocon User level

Off

User1 User2 User3

Off: Youcanuseallofthebuttonsontheremotecontrol.

User1:Youcanonlyuse

, , , , buttons on the remote control.

User2:Youcanonlyuse

button on the remote control.

User3:

Locksallthebuttonsonremotecontrol.

Off-timer function

Enable:Enablesthe“Off-timerfunction”.

Disable:Disablesthe“Off-timerfunction”.

Note:When“Disable”isset,theOff-timeriscancelled.

Initial Power Mode

Normal

On Standby

Setsthepowermodeoftheunitforwhenthepowerrecoversfromfailureorafterpluggingoffandinagain.

Normal:Powerreturnsinasthesamestateasbeforethepowerinterruption.

Standby

:Powerreturnsinstandbymode.(PowerIndicator:red/orange)

On:   PowerreturnsinpowerOn.(PowerIndicator:green)

Note:Whenusingmultipledisplays,“Standby”ispreferredtobesetinordertoreduceapowerload.

Power On Screen

Delay

Off

1 2 3.... 30

Youcansetthepower-ondelaytimeofthedisplaystoreducethepowerload,whenyoupress

turnonthemultipledisplaysthataresettogether,forexample,onMULTIDISPLAYsystem.

Seteachdisplay’ssettingindividually.

Off:     Thedisplaywillbeturnedonatthesametimeas

is pressed.

1 to 30 (sec.)

:Setthepower-ondelaytime(second).

Afterpressing ,thedisplaywillbepoweredonwithtimedelaydependingonthissetting.

Notes:

•Duringthisfunctionisworking,thepowerindicatorisblinkinggreen.

•Thisfunctionalsoworkswhenthepowerrecoversfromfailureorafterpluggingoffandinagainthe

powercord.

Clock Display

Off: Notdisplaytheclock.

On: Displaytheclock.

Theclockisdisplayedatthelowerleftofthescreenwhen

button is pressed.

Note:When“PRESENTTIMESetup”isnotset,theclockisnotdisplayedeven

if“ClockDisplay”is“On”.(seepage27)

10:00

Normalization

When both mainunit buttons and remote control are disableddue to the “Button lock” or “RemoconUser level”

adjustments,setallthevalues“Off”sothatallthebuttonsareenabledagain.

Press the buttononmainunittogetherwith buttonontheremotecontrolandholdformorethan5seconds.The

“Shipping”menuisdisplayedandthelockisreleasedwhenitdisappears.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Comments to this Manuals

No comments

Sanyo PID-42NE1 Operations Instructions Page 42

Comments to this Manuals

Related products and manuals for LED displays Sanyo PID-42NE1