Sanyo DSR-C100 User Manual download pdf (Page 14)

CONNECTIONS

Carefully read the documentation which is provided with each of the components being connected.

Be careful to connect components correctly, as incorrect connections could cause fire or other damage.

Basic connections

13.8 V DC

(A) Hold-up switch

Coaxial cable

To VIDEO IN

TV monitor

(sold separately)

(B) Suspicion switch

(connect a lamp or similar device)

Connect all required devices to the control

terminals before turning on the power.

(A) Connect a commercially-available hold-up

switch (H/GND).

(B) Connect a commercially-available suspicion

switch (S/GND).

lamp to the warning signal output terminal.

This will light or flash in the same way as the

warning indicator on the rear of the camera

for checking purposes.

Connecting the power supply

1 Connect a commercially-available cable to the

relay connector (supplied), and then connect

the cable to the power supply connector (13.8

V/GND) of the camera.

2 Insert the plug of the AC adaptor (supplied) into

the relay connector terminal.

3 Insert one end of the power cord (supplied) into

the AC adaptor, and insert the other end into a

wall outlet.

Note:

•

The cable that is connected to the relay

connector can be up to a maximum of 30

meters in length, but it should not be bound up

with any other cables.

•

Use UL NISPT-2 (2/18AWG, 105˚CM, VW-1)

cables which are listed in UL as the connection

cables.

L42A4/US (DSR-C100) GB 2001, 4, 16

English 13

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 44 45

Comments to this Manuals

No comments

Sanyo DSR-C100 User Manual Page 14

Comments to this Manuals

Related products and manuals for Security cameras Sanyo DSR-C100