Sanyo DSR-C100 User Manual download pdf (Page 9)

Control terminals

5 VIDEO OUT terminal (BNC plug)

This terminal is used to connect the camera to a

component such as a monitor or camera control

unit.

6 RESET button

Press the RESET button if an abnormality occurs

with the camera. Settings are not changed

when the camera is reset in this way.

7 Warning indicator

•

The warning indicator lights when the

camera power is turned on.

•

It flashes when there is a hard disk error or if

there is a problem with the backup battery.

GND GND GND

WARNING

DC13.8V

1 2 3 4 5 6 7

Terminal Signal Input/output voltage

1 H (HOLD-UP) Alarm switch input signal 2.5 V or higher when alarm switch off/

0.4 V or lower when alarm switch on

2 GND Alarm switch and suspicion switch ground 0 V

3 S (SUSPICION) Suspicion switch input signal 2.5 V or higher when suspicion switch off/

0.4 V or lower when suspicion switch on

4 GND Warning ground 0 V

5 WARNING Warning signal output 3.3 V or higher when warning generated

6 GND Power supply ground 0 V

7 DC 13.8 V Power supply input 13.8 V DC

L42A4/US (DSR-C100) GB 2001, 4, 16

8 English

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

No comments

Sanyo DSR-C100 User Manual Page 9