Sanyo KS3082 User Manual download pdf (Page 14)

USING THE 1-HOUR OFF

TIMER

1. 1-Hour OFF Timer

This function causes the unit to operate for one hour and then

stop, regardless of whether the unit is on or off when this

button is pressed.

The indicator in the display indicates that this function is

operating.

Setting procedure:

Regardless of whether the unit is operating or stopped, press the 1

HR. TIMER button.

appears in the display.

Cancellation procedure:

Press the ON/OFF operation button to turn the unit off, wait for the

unit to stop operating, and then press the ON/OFF operation button

again.

The 1-Hour Timer function is now cancelled and the unit operates

normally.

• If, while the 1-Hour Timer function is operating, the 1HR. TIMER

button is pressed once to cancel the function and then again, the

unit continues to operate for one hour from that point in time and

then stops.

• It is not possible to use the OFF Timer and 1-Hour OFF Timer

together. Whichever function is set last takes precedence. If the 1

HR. TIMER button is pressed while the TIMER OFF function

operates, the OFF Timer is cancelled and the unit will stop

operating one hour later.

2. Operation together with the daily ON/OFF

repeat timer

The 1-Hour OFF Timer setting is given priority over the DAILY ON/

OFF REPEAT setting.

TIPS FOR ENERGY SAVING

Do not

• Block the air intake and outlet of the unit. If they are

obstructed, the unit will not work well, and may be damaged.

• Let direct sunlight into the room. Use sunshades, blinds or curtains.

If the walls and ceiling of the room are warmed by the sun, it will

take longer to cool the room.

• Always try to keep the air filter clean. (Refer to “CARE AND

CLEANING”.) A clogged filter will impair the performance of the

unit.

• To prevent conditioned air from escaping, keep windows, doors and

any other openings closed.

ADJUSTING THE AIRFLOW

DIRECTION

1. Horizontal

The horizontal airflow can be adjusted by moving the vertical vanes

with your hands to the left or right.

When the humidity is high, the vertical vanes should be in the

front position during the cooling or dehumidifying operation. If

the vertical vanes are positioned all of the way to the right or

left, condensation may begin to form around the air vent and

drip down.

2. Vertical

The vertical airflow can be adjusted by moving the flap with the

remote control unit. Do not move the flap with your hands. Confirm

that the remote control unit has been turned on. Use the FLAP

button to set either the sweep function or one of the six airflow

direction settings.

• The flap automatically closes when the unit is off.

NOTE

CAUTION

FAN

SWEEP

A. Sweep function

The flap starts moving

up and down to deliver

air over the sweep

range.

B. Setting the airflow manually

Referring to the above

illustration, use the

FLAP button to set the

airflow direction within

the range used during

cooling or

dehumidifying

operation.

C. Auto flap function

The flap is set

to the

recommended

position.

COOL

DRY

NOTE

OI-150-14-EG

01_KS3682_EN.fm Page 14 Friday, February 12, 2010 12:26 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Comments to this Manuals

No comments

Sanyo KS3082 User Manual Page 14

Comments to this Manuals

Related products and manuals for Split-system air conditioners Sanyo KS3082