Sanyo PLC-XU4000 Owner's Manual download pdf (Page 23)

Rotate the Zoom Ring to zoom in and out.

Rotate the Focus Ring to adjust the focus of the image.

Zoom and Focus Adjustment

If a projected picture still has keystone distortion after

pressing the AUTO SETUP button on the top control or the

AUTO SET button on the remote control, correct the image

manually as follows:

Press the KEYSTONE button on the remote control. The

Keystone dialog box appears. Use the Point ▲▼ buttons to

correct keystone distortion. The keystone adjustment can be

stored (see pages 37, 45).

Reduce the upper width

with the Point ▲ button.

Reduce the lower width

with the Point ▼ button.

•Thewhitearrowsindicatethatthereisno

correction.

•Aredarrowindicatesthedirectionofcorrection.

•Anarrowdisappearsatthemaximumcorrection.

•If you press the KEYSTONE button on the

remote control once more while the keystone

dialog box is being displayed, the keystone

adjustment will be canceled.

•Theadjustablerangeislimiteddependingonthe

input signal.

Keystone Correction

Remote Control

Auto setup function is provided to automatically execute the setting of Auto setup (includes Input search, Auto

PC adj. and Auto Keystone functions) in the setting menu by just pressing the AUTO SETUP button on the

top control or the AUTO SET button on the remote control. Refer to page 47 for the setting of the Auto setup

function.

Notes:

 •AutoKeystonecorrectsverticaldistortiononly;itdoes

not correct horizontal distortion.

 •AutoKeystonecannotworkwhenCeilingfeatureisset

to On in the Screen Size Adjustment menu (pp.37, 45).

 •Perfect correction of the image distortion cannot be

ensured with the Auto setup function. If the distortion

cannot be corrected properly by pressing the AUTO

SETUP or AUTO SET button, adjust manually by

pressing the KEYSTONE button on the remote control

or selecting Keystone in the Screen Size Adjustment

menu (pp.37, 45).

 •Fine sync, Total dots, Horizontal and Vertical position

of some computers cannot be fully adjusted with

the Auto PC Adjustment function. When the image

is not provided properly with this operation, manual

adjustments are required (pp.31-32).

AUTO SET button

Auto Setup Function

POINT ▲▼ buttons

KEYSTONE button

Zoom Ring

Focus Ring

Top Control

AUTO SETUP button

POINT▲▼ buttons

Basic Operation

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 77 78

Comments to this Manuals

No comments

Sanyo PLC-XU4000 Owner's Manual Page 23

Comments to this Manuals