Sanyo PLC-XU4000 Owner's Manual download pdf (Page 47)

 Note:

 •Auto Keystone corrects vertical distortion only,

not correct horizontal distortion.

 •The Auto Keystone function cannot work when

the Ceiling feature is set On in the Setting menu

(pp.37, 45).

 •Perfect correction of the image distortion cannot

be ensured with the Auto setup function. If the

distortion is not corrected properly by pressing

the AUTO SETUP or AUTO SET button, adjust

manually by pressing the KEYSTONE button on

the remote control or selecting Keystone in the

Setting menu (pp.23, 37, 45).

 •Fine sync, Total dots, Horizontal and Vertical

position of some computers cannot be fully

adjusted with the Auto PC Adjustment function.

When the image is not provided properly with

this operation, manual adjustments are required

(pp.31-32).

Auto setup

Input search

This function detects the input signal automatically. When

a signal is found, the search will stop. Use the Point ▲▼

buttons to select one of the following options.

Off ........... Input search will not work.

On1.......... Input search works when.

– Pressing the AUTO SETUP button on the top

control or the AUTO SET button on the remote

control.

On2.......... Input search works under the following situation.

– When turning on the projector by pressing the

ON/STAND-BY button on the top control or the

remote control.

– When pressing the AUTO SETUP button on

the top control or the AUTO SET button on the

remote control.

– When the current input signal is cut off.*

* If the No show or Freeze function is active, cancel it to

activate the Input search. It is also unavailable when

On-Screen menu is displayed.

Auto PC adj.

On........Enables Auto PC Adjustment when pressing

the AUTO SET button on the remote control or

the AUTO SETUP button on the top control.

Off .......Disables Auto PC Adjustment.

Auto Keystone

Auto . . . . . Always works and corrects keystone distortion

according to the projector's tilt.

Manual ....Works only when pressing the AUTO SETUP

button on the top control or the AUTO SET

button on the remote control.

Off .......Disables Auto Keystone.

Auto setup

 Note:

 •WhileInput search is set to On1 or On2, the status of

Input and Lamp are displayed every time the signal is

switched.

 •Onlythelastselectedinputsourcecanbedetected.

 •IftheINPUTbuttononthetopcontrolorthe

COMPUTER 1/2 buttons, VIDEO or S-VIDEO or

COMPONENT button on the remote control is pressed

during Input search is in progress, Input search will stop

and go back to the previous input signal.

 •Input search, Auto PC adj. and Auto Keystone cannot

be set Off at the same time.

This function enables Input search, Auto Keystone correction

and Auto PC adjustment by pressing the AUTO SETUP button

on the top control or the AUTO SET button on the remote

control. Settings for those functions can be altered as follows:

Setting

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 77 78

Comments to this Manuals

No comments

Sanyo PLC-XU4000 Owner's Manual Page 47

Comments to this Manuals