Sanyo PLC-XU4000 Owner's Manual download pdf (Page 49)

Capture

This function enables you to capture an image being

projected to use it for a starting-up display or interval of

presentations.

Select Capture and press the SELECT button.

A confirmation box appears and select Yes to capture the

projected image.

After capturing the projected image, go to the Logo select

function and set it to User. Then the captured image will be

displayed the next time you turn on the projector.

To cancel the capture function, select Yes in the "Quit?"

confirmation box.

 Note:

 •Before capturing an image, select Standard in the

Image select Menu to capture a proper image (pp.33,

41).

 •A signal from a computer can be captured up to XGA

(1024 x 768). A signal from video equipment can be

captured except for 720p, 1035i and 1080i.

 •When capturing the image that has been adjusted by

the Keystone function, the adjusted data is automatically

reset and the projector captures an image without

keystone correction.

 •WhenLogo PIN code lock is set to On, capture cannot

be selected.

 •When starting to capture a new image, the previously

stored image is cleared even if you cancel the capturing.

•When there is no captured image or it is interrupted

while capturing an image, User can not be selected, you

can only switch between Default and Off.

Logo PIN code lock

This function prevents an unauthorized person from

changing the screen logo.

On ........... The screen logo cannot be changed without a

Logo PIN code.

Off ........... The screen logo can be changed freely from

the Logo Menu (p.48).

If you want to change the Logo PIN code lock setting,

press the SELECT button and the Logo PIN code dialog

box appears. Enter a Logo PIN code by following the steps

below. The initial Logo PIN code is set to “4321” at the

factory.

Logo PIN code lock

Setting

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 77 78

Comments to this Manuals

No comments

Sanyo PLC-XU4000 Owner's Manual Page 49

Comments to this Manuals